POST 1/8 and 1/4 times here
POST 1/8 and 1/4 times here
i have a 94 3.4 and just wondering what everyone elses times are
just list the eng. you have and any mods and your 60', 1/8 et and trap, and 1/4 et and trap if you have one
i have to go look at mine but all i remember is my 1/8 et
10.466
just list the eng. you have and any mods and your 60', 1/8 et and trap, and 1/4 et and trap if you have one
i have to go look at mine but all i remember is my 1/8 et
10.466
1994 3.4L 5-speed
Race weight on this run 3200 lbs(only weight reduction was spare and jack)
Cooper Cobras 235s(crappy street tires, pretty worn)
1/4 mile mods
-Accell 7mm plugs
-AC delco Rapidfire plugs
-LT1 rear axle swap(Factory LT1 4 wheel
-LT1 driveshaft(one piece steel)
-disc brakes, 3.42 gears, Limited Slip)
-ASP Crank pulley
-homeade CAI
-No Cat, Dynomax Universal reversable Thrush muffler on the Y-pipe($15 at Advanced auto parts)
-1LE tranny mount
-1LE poly torque arm bushing
Twisty mods
-BMR Strut Tower Brace
-1LE 32/21mm sway bars(21mm might have helped me get a better launch)
-Prothane poly bushings and endlinks
60' 2.027
330 6.274
1/8 9.816
mph 69.63
1000 12.864
1/4 15.456
MPH 86.82
http://timeslips.firebirdv6.com/time...ric_morton.jpg
I seem to be one of the quicker guys....
also here is a small lsit of the guys that run there cars. 3.4Ls seem to be at the bottom of the list.
http://timeslips.firebirdv6.com/
Race weight on this run 3200 lbs(only weight reduction was spare and jack)
Cooper Cobras 235s(crappy street tires, pretty worn)
1/4 mile mods
-Accell 7mm plugs
-AC delco Rapidfire plugs
-LT1 rear axle swap(Factory LT1 4 wheel
-LT1 driveshaft(one piece steel)
-disc brakes, 3.42 gears, Limited Slip)
-ASP Crank pulley
-homeade CAI
-No Cat, Dynomax Universal reversable Thrush muffler on the Y-pipe($15 at Advanced auto parts)
-1LE tranny mount
-1LE poly torque arm bushing
Twisty mods
-BMR Strut Tower Brace
-1LE 32/21mm sway bars(21mm might have helped me get a better launch)
-Prothane poly bushings and endlinks
60' 2.027
330 6.274
1/8 9.816
mph 69.63
1000 12.864
1/4 15.456
MPH 86.82
http://timeslips.firebirdv6.com/time...ric_morton.jpg
I seem to be one of the quicker guys....
also here is a small lsit of the guys that run there cars. 3.4Ls seem to be at the bottom of the list.
http://timeslips.firebirdv6.com/
I went to the track last fall for the first time.. I have a 96 3.8l bird ... slp cai, all new catback exhaust... and i got the y87 package.... I pulled consistent 15.5's and when i took off my belt for one run, which wasnt the smartest, i pulled a 15.3..... not too bad for a v6
Don't have the slips here in Austin, so I will have to go off memory...
2000 Firebird (came with 3.42's and LSD at no cost)
K&N, raised airbox, free ram air, !silencer, 3" pipe after S to Flowmaster 80, HPP3
60ft was around 2.1s
1/8th mile was very high nines? (If that seems really off, I could be wrong)
1/4 mi (I remember this one perfectly) was 14.9204 @ 90.56 mph
2000 Firebird (came with 3.42's and LSD at no cost)
K&N, raised airbox, free ram air, !silencer, 3" pipe after S to Flowmaster 80, HPP3
60ft was around 2.1s
1/8th mile was very high nines? (If that seems really off, I could be wrong)
1/4 mi (I remember this one perfectly) was 14.9204 @ 90.56 mph
1996 Camaro 3.8 Series II
I dont have my slips with me so I can only go off of memory. My best 1/4 time was 16.932. With a stock 3.8 and 3.08 gears without the Y87 package.
I dont have my slips with me so I can only go off of memory. My best 1/4 time was 16.932. With a stock 3.8 and 3.08 gears without the Y87 package.
heres my car
1994 camaro 3.4, a4
only mods were flowmaster exhaust and poorly made cai
Reaction: 1.284
60 ft" 2.730
330 ft: 7.422
1/8: 11.362
1/8 mph: 62.33
1/4 et: 17.657
1/4 mph: 77.58
it was about 75-80 degrees that day...very humid...and it was high school nationals and the track was a little crappy....plus it was my first time at the track...but still that is very slow...consistent 17.6-17.8's all day
1994 camaro 3.4, a4
only mods were flowmaster exhaust and poorly made cai
Reaction: 1.284
60 ft" 2.730
330 ft: 7.422
1/8: 11.362
1/8 mph: 62.33
1/4 et: 17.657
1/4 mph: 77.58
it was about 75-80 degrees that day...very humid...and it was high school nationals and the track was a little crappy....plus it was my first time at the track...but still that is very slow...consistent 17.6-17.8's all day
Bone stock, mine went 16.3. I have no idea what it will do with the current mods., which are a CAI, pulley, thermostat, and an LT1 driveshaft. I'm really hoping for mid 15's. I also ran the 16.3 in cold weather.


