LT1 swap
09-21-2004, 01:39 PM
#1
Registered User
Thread Starter
Join Date: Aug 2004
Location: Cincinnati OH
Posts: 62
LT1 swap
The stock 3.4 in my 95 firebird isn't holding much oil pressure so Im going to replace the sending unit and if thats not it I guess I'll be needing a new motor. My question is, what will I need to replace to make this swap besides engine and wiring? Will my stock A4 tranny work? Any info. is appreciated. Thanks,Mike
09-21-2004, 01:54 PM
#2
Registered User
Join Date: Jan 2004
Location: maryland
Posts: 288
Re: LT1 swap
Good bet it's the sending unit, mine was covered in oil from a leak. However, if it's not here's some info.http://www.tacreationsusa.com/3_4_3_8_v6_to_lt1.htm
and if that's too much work for ya, I just did the swap and have a complete '95 3.4/at for sale!!!
and if that's too much work for ya, I just did the swap and have a complete '95 3.4/at for sale!!!
Last edited by 95wannabe; 09-21-2004 at 01:57 PM.
Thread
Thread Starter
Forum
Replies
Last Post