How much could a relatively stock internally rebuild 3.4L handle, will have ported heads, upper and lower intake and ported tb, headers and a couple of other bolt ons. It might also have a cam..I just want an idea of what i should be able to achieve.Thanks

 

i wouldnt go above a 75 shot... personally, if its just for fun, 50 shot max!

 

I concur.

75 MAX on a rebuilt 3.4.

 

Well,since they came with less HP than my lawnmower,I would start at ATLEAST a 400HP FOGGER set up.

 

hahaha iight guys thanks

 

I have head form one of the nitrous companys that you can go up to 20hp per cylinder.

 

what company did u hear this from? and did they mean a stock engine ?

 

funny, the ***** i bought your wife had more HP than your lawnmower

note, you might wanna E.D. checked out
thats rediclous, 120 on a 3.4L HAHAHAHAHA maybe with forged pistons, bigger injectors, fuel pump.. and the list goes on

 

I don't know, those seem like awfully small numbers... I know guys that are throwing 100shots on their 2.2L Eco with no internal mod's. Even my Cav can handle a consistent 75 shot.

 

1st off.. good 1 atl, that was funny haha

2nd.. Idk i hear different numbers from everyone. That tim guy ran a 90 shot fine, then other people tell me 50 shot max, others say a 75 is fine..

<shrug> o well, ill start with a 50 shot and go on from there

 

I think the 20 per cylinder was from ZEX.
Not a hole lot if you look at a sparying 4 cyl, or a LT1.
NOS claimed not to add more than 50% hp with nitrous.
These are old numbers I don't know if they still use them.

 

yes they are small #'s . but there were a few people on here a few years ago that all lost a piston or 2 (generally # 5 or 6) when spraying over a 50 shot

i wonder how much you could throw at the motor if you were using a direct port kit..... hummmm..... i might end up doing that before i put my new motor in in around a year (hopefully)

 

Our plenums were never ment to have fuel sparyed in them.
It could puddle.
With direct port you can go way higher.

 

On the bottem of page 3 of my cardomain site I posted my 3 stage nitrous control, it's just the schematic.

 

wonder if i could do a rebuild for my 3.4 to hold 200 shot