Finally got a timeslip
04-06-2003, 07:23 PM
#1
Registered User
Thread Starter
Join Date: Oct 2002
Location: Collinsville IL
Posts: 162
Finally got a timeslip
With 3 boltones
CAtback 2.5 flowmasters
Custom K&N CAI
LT1 driveshaft
here is my timeslip
r/t.731
60ft 2.305
330 6.775
1/8 10.538
mph 65.93
1000' 13.755
1/4 16.493
mph 81.73
CAtback 2.5 flowmasters
Custom K&N CAI
LT1 driveshaft
here is my timeslip
r/t.731
60ft 2.305
330 6.775
1/8 10.538
mph 65.93
1000' 13.755
1/4 16.493
mph 81.73
04-07-2003, 11:07 PM
#9
Registered User
Join Date: Dec 2001
Location: Chicago, IL
Posts: 3,674
Originally posted by 94TeALFiReBiRd
yea i want a 2.2 or 2.1 ....I'm most likely gettting a few goodies this week
Level II panhard rod/with firmer bushings-
Lower control arms with level II bushings-
yea i want a 2.2 or 2.1 ....I'm most likely gettting a few goodies this week
Level II panhard rod/with firmer bushings-
Lower control arms with level II bushings-
04-07-2003, 11:52 PM
#10
Registered User
Join Date: Jun 2002
Location: San Luis, CA
Posts: 77
Originally posted by 94GrayV6
I guarantee you the best you'll be able to do with street tires and an open rear will be a ~2.2. If you get an LSD you might be able to pull a 1.9, maybe even a 1.8 if you get some gears too.
I guarantee you the best you'll be able to do with street tires and an open rear will be a ~2.2. If you get an LSD you might be able to pull a 1.9, maybe even a 1.8 if you get some gears too.
Thread
Thread Starter
Forum
Replies
Last Post