Hey all I have a 94 V6 camaro with power windows motos still from the factory and was hoping of replacing them with some new ones. My question is can I change out the motors I have now with some from like a 1999+. Are all the mountings the same and fitings confugred the same way or will I have to just break down andbuy a new one or can I go find a good working one from a junkyark and put it in. Any help would be greatly appreciated.

 

93-02 window motors are interchangeable. It's fairly easy to do but a little time consuming. I used the way that doesn't require you to take out the regulator.

 

99blackSS is right i belive. All the window motors should be the same.

 

thanks 99blackss and seeing how you have already gone through the process of changing out the motors do you have any tips or tricks that you would care to share to make my experience that much easier thanks

 

My only tip is doing it this way (click here) . At the bottom of the page theres picture and directions of each step. It's pretty easy but will probably take around 3 hours the first time.

Thanks to shoebox for doing the write up.

 

The window motors are not as difficult as you may think. If your current ones are working I would not change them....if you need help, I live in Houston and can help.

 

well they are on the verge of failing my driver side window will only go up halfway before it stops and the passenger can only go up about 3/4 the way up before it stops

 

Following the instructions on the website is easy. If you need help, drop me an email.

 

thanks for all the help guys I'm going to do the work tomarrow seeing how its my day off. And just one last question I want to put a new spoiler on my camaro. What I would really like to do is put an 02 ss spoiler on but are all the mountings and wiering configurations the same?