95 camaro 3.8 liter v6
#1
95 camaro 3.8 liter v6
hey, i have a 95 camaro 3.8 liter v6. Im not really into changing everything on my car. just want my car to be "loud". any information about what I can do. Something not that expensive. Any sites, information will be very helpful. thanks
#2
i got a dynomax super turbo muffler on my 99 3.8 and it sounds pretty good. only cost me like 60$, then another 75 to install it. You can get whatever kind of tips you want, mine were 50$ for 2 chrome 3". you could also put a cutout on it, not sure what it would sound like though....
#3
hey, first off i really appreciate you for replying back to me. second i see that you live in virginia, i also live in va. where in va do you live? third off, can you please explain a little bit more on what I have to do and what to order in order to do what you said? sorry to bother you
thanks
thanks
#5
Registered User
Join Date: Nov 2001
Location: carbondale IL \ Alton IL (outside St Louie MO)
Posts: 657
if you want it just to be loud , get a cutout... have it placed by an exhaust shop before the cat... if they wont do it before the cat (which they probably wont do) tell em to do it before the axle.., you can get a cutout on jegs, summitt.. many exhaust shops have them.. they are easy to get ahold of
#6
I would go with a flowmaster muffler. I've got the 80 series flowmaster muffler with a 2 3/4" I-Pipe (pipe going from the cat to the muffler) and an aftermarket catalytic converter. It sounds good and fairly loud. It also adds some hp. I was gonna go the route of the cut out or take the cat right off, but i have heard that these sound pretty bad on a V6. Personally i don't like the sound of a dynomax muffler, but thats just my opinion. I find that the flowmaster gives it a deeper rumble than the dynomax which is again, my opinion.
#7
thanks for the information, at first i wanted to get a cutout but i realized that i would kind of go for the dual exhuast as well. that dynomax surper turbo muffler sounds good with the 3 inch tips. please give me information about where i can get them from and how much the cost would be?
thanks
thanks
Last edited by mees87; 03-08-2004 at 06:16 PM.
#13
It will be loud compared to a dynomax by itself but will be deeper and somewhat louder with an intake. More power is the main benefit from pairing the exhaust with an intake. Sound is an extra.
Installation all depends really. Depends on if you plan on getting it all done at the shop or if you plan on buying parts and having a shop install it or doing it all yourself.
Installation all depends really. Depends on if you plan on getting it all done at the shop or if you plan on buying parts and having a shop install it or doing it all yourself.
#14
I am going to buy the flowmaster kit for $235 then give it to a shop to install. how much do you think they will charge to install it? and where can i get a nice intake and not that expensive for a 95 camaro v6?
thanks
thanks
#15
SLP cold air intake, but its almost 200 bones. buy it through lmperformance, thunderracing, or tbyrne. shop will prolly charge you 50-100 to hang the exhaust, buts its really not worth it (to me at least)... you can do it yourself in a couple hours at most.