55 more hp?
55 more hp?
what kind of mods can I do to pump out ~55 more hp?
and.. whats on the inexpensive/easy to do side?
and yea, taking out seats and the spare tire jack work, but you cant take them out when.. they're already out =]
call me a tard, but how much would getting a magnaflow catback bump me?
and.. whats on the inexpensive/easy to do side?
and yea, taking out seats and the spare tire jack work, but you cant take them out when.. they're already out =]
call me a tard, but how much would getting a magnaflow catback bump me?
what kind of mods can I do to pump out ~55 more hp?
and.. whats on the inexpensive/easy to do side?
and yea, taking out seats and the spare tire jack work, but you cant take them out when.. they're already out =]
call me a tard, but how much would getting a magnaflow catback bump me?
and.. whats on the inexpensive/easy to do side?
and yea, taking out seats and the spare tire jack work, but you cant take them out when.. they're already out =]
call me a tard, but how much would getting a magnaflow catback bump me?
So, that means nothing cheap.
Catback? A few HPs, maybe.
have head that the 3.8's in grand prix claim an increase HP of 40 over stock 3.8 when they add the turbocharger... but I don't know if I belvie it as I just bought one to commute to work in and I don't think it is that much, if any, faster than my 3.8 stock fbird was.... but I think it's just me not being used to that FWD thing???
persoanl thought: to add that much HP going to have to go way into the motor so I would be thinking of a swap to a 5.7... just my 0.2
persoanl thought: to add that much HP going to have to go way into the motor so I would be thinking of a swap to a 5.7... just my 0.2
have head that the 3.8's in grand prix claim an increase HP of 40 over stock 3.8 when they add the turbocharger... but I don't know if I belvie it as I just bought one to commute to work in and I don't think it is that much, if any, faster than my 3.8 stock fbird was.... but I think it's just me not being used to that FWD thing???
persoanl thought: to add that much HP going to have to go way into the motor so I would be thinking of a swap to a 5.7... just my 0.2
persoanl thought: to add that much HP going to have to go way into the motor so I would be thinking of a swap to a 5.7... just my 0.2
what kind of mods can I do to pump out ~55 more hp?
and.. whats on the inexpensive/easy to do side?
and yea, taking out seats and the spare tire jack work, but you cant take them out when.. they're already out =]
call me a tard, but how much would getting a magnaflow catback bump me?
and.. whats on the inexpensive/easy to do side?
and yea, taking out seats and the spare tire jack work, but you cant take them out when.. they're already out =]
call me a tard, but how much would getting a magnaflow catback bump me?
Inexpensive and easy would be swapping in an aluminum driveshaft. That may free up a few horses but will help with acceleration.
You could always supercharge, swap the motor, or go nitrous...depending on your budget.
BTW, what mods do you have?
Last edited by ImportKILLER; Feb 22, 2007 at 03:57 PM.
No mods right now, I got it 2 months ago, looking to break away from the 'completely stock' setup.
I'm not exactly an automotive genius, and I don't want to do a bunch of **** to my car thats prone to get ****ed up, because this is my DD.
I have ~$4000
the most I really want to spend is $2000
I'm not exactly an automotive genius, and I don't want to do a bunch of **** to my car thats prone to get ****ed up, because this is my DD.
I have ~$4000
the most I really want to spend is $2000
Last edited by plusandrew; Feb 22, 2007 at 05:52 PM.
Nitrous is the easiest way....just do a complete system with all the safety stuff....probly run you around $1500, I have a wet kit really cheap, I would never use an aluminum DS...they are bad news, you won't gain anything over a steel that would be noticable(please noone argue with me on this) at the very most you would get half a tenth and the weather change would make more of a diff than that.
BTW I buila an engine for a friend...its a stock headed rebuilt 305 SBC....it made 230 at the wheels and the car runs 13.0 at 106 so that goes to show you alot is in the set-up of the car....thats where the most or your money should go...in the car not the engine.
If you want to lose rotating weight...like swapping to an aluminum DS....checkout wheels and tires, you will get alot more from that than anything else, FI is on all the time so remember that before you make the jump, nitrous you cut the switch off and have you normal car... I have never met anyone that has run FI that hasn't had a problem with a head unit overtime
BTW I buila an engine for a friend...its a stock headed rebuilt 305 SBC....it made 230 at the wheels and the car runs 13.0 at 106 so that goes to show you alot is in the set-up of the car....thats where the most or your money should go...in the car not the engine.
If you want to lose rotating weight...like swapping to an aluminum DS....checkout wheels and tires, you will get alot more from that than anything else, FI is on all the time so remember that before you make the jump, nitrous you cut the switch off and have you normal car... I have never met anyone that has run FI that hasn't had a problem with a head unit overtime
EWWW no, no nitrous. Rofl. I had a 3.4L with pacesetters, K&N CAI. Ported heads MSD wires, Underdrive pullys and a Jet STG II PCM chip. gave me a little unnnffffffhh. Then I got a bike...welp the chevys not a 3.4 anymore...
Have a machinist work yor heads and intake a little. Maybe even your throttle body. Get a K&N CAI (cold air intake) and do a few bolt ons, (MSD wires Under Drive pullys jet stg II chip) see how you like it, if you don't Cam it if you can find a cam... or can do the work.
btw i still have the underdrives and msd wires for grabs. The motor, pipes, and chip are gone.
let me know if this helps. Goodluck!
Have a machinist work yor heads and intake a little. Maybe even your throttle body. Get a K&N CAI (cold air intake) and do a few bolt ons, (MSD wires Under Drive pullys jet stg II chip) see how you like it, if you don't Cam it if you can find a cam... or can do the work.
btw i still have the underdrives and msd wires for grabs. The motor, pipes, and chip are gone.
let me know if this helps. Goodluck!
been driving it to work and haven't even poped the hood... think I'm getting old


