z28 vs. mustang bullitt
Registered User
Joined: May 2001
Posts: 97
From: Reno, NV
Re: z28 vs. mustang bullitt
Originally Posted by djn
Poor little Mustang’s, 
I feel so sorry for them that I don’t even waist my time racing them anymore. I live in South Florida and almost every high school punk drives a stock GT with Flowmasters, big bark but little bite! I’ve spanked so many of them light to light it just isn’t funny. Now, an 03 -04 SVT Cobra is quite a different story depending on the mod’s.
I feel so sorry for them that I don’t even waist my time racing them anymore. I live in South Florida and almost every high school punk drives a stock GT with Flowmasters, big bark but little bite! I’ve spanked so many of them light to light it just isn’t funny. Now, an 03 -04 SVT Cobra is quite a different story depending on the mod’s.
Registered User
Joined: May 2001
Posts: 97
From: Reno, NV
Re: z28 vs. mustang bullitt
Originally Posted by blazer_4.3
i think i have the ****tiest running lt1 out there.
Registered User
Joined: May 2001
Posts: 97
From: Reno, NV
Re: z28 vs. mustang bullitt
Originally Posted by 96m6lt1
man i wish i was at sea level again,i was wondering what the 02-04 gts ran like cause this guy always wants to race me and i wont due to the wheels i have the rears are 18s and they robbb a lot of gear,any ideas of what they should run?remember this i am at 2400' 
..
..
Registered User
Joined: May 2001
Posts: 97
From: Reno, NV
Re: z28 vs. mustang bullitt
Originally Posted by mebanditws6
Both you and Falchuck, go read the corral forums and see for yourself. The 96-01 Cobras are also 12 second cars with 4.10's if they get traction. If the guy with 4.10's can drive and has nittos, his 99+ GT will hit 12's.
A bone stock 4.10ed '96-01 Cobra will not hit 12s! Prove it! MMFF had a bone stock '97 Cobra that ran 13.7. They added 4.56 gears and it ran 13.5. Those guys can drive very well. It takes more than just 4.10s to put a Cobra in the 12s. So a bone stock 99+ GT with 4.10s and Nittos will hit 12s? BS. Prove it again. They need a few more mods than that.
Registered User
Joined: May 2001
Posts: 97
From: Reno, NV
Re: z28 vs. mustang bullitt
Originally Posted by mebanditws6
annihilated the 97 Z with 4.33's and a couple bolt ons, I don't see why 4.10's could knock off 6tenths or more.
Registered User
Joined: May 2001
Posts: 97
From: Reno, NV
Re: z28 vs. mustang bullitt
Originally Posted by Roller406Bu
Come on down to Beech Bend in Bowlingreen and I'll demonstrate... 
Registered User
Joined: Oct 2002
Posts: 0
From: Kentucky
Re: z28 vs. mustang bullitt
Originally Posted by Bersaglieri
Wow, sounds just like the Stock GT with 4.10's that everyone else is talking about.
Lets get this all figured out...You have a GT with 4.30's and other significant mods. How are you "demonstrating" how a Stock GT with 4.10's runs 12's? I guess with that kind of logic I can demonstrate how a stock LT1 with 2.73's runs mid to low 13's and smokes 2000+ Lightnings with mods in sig.
I think you are running out of legs to stand on, even if you are sitting on a 4 legged pony.
-Dustin-
Lets get this all figured out...You have a GT with 4.30's and other significant mods. How are you "demonstrating" how a Stock GT with 4.10's runs 12's? I guess with that kind of logic I can demonstrate how a stock LT1 with 2.73's runs mid to low 13's and smokes 2000+ Lightnings with mods in sig.
I think you are running out of legs to stand on, even if you are sitting on a 4 legged pony.
-Dustin-
Registered User
Joined: Oct 2002
Posts: 0
From: Kentucky
Re: z28 vs. mustang bullitt
Originally Posted by Steve Y
Yes, but you have a lot more than 4.10s and Nittos. We all know what cars with your mods can do.
Registered User
Joined: Oct 2002
Posts: 0
From: Kentucky
Re: z28 vs. mustang bullitt
Originally Posted by Steve Y
High 13s to low 14s at 99ish bone stock 5-speed at sea level. How are 18" wheels robbing you of gear? Tire height matters, not wheel height. At 2400 feet they should run about mid 14s at 96ish.
Registered User
Joined: May 2001
Posts: 97
From: Reno, NV
Re: z28 vs. mustang bullitt
Originally Posted by Roller406Bu
18's aren't helping any at all cause there heavy compared to a weld wheel...Size matters I disagree
Registered User
Joined: Sep 2003
Posts: 5,907
From: The Wild West
Re: z28 vs. mustang bullitt
Glad to see everyone is on the same page now, next we can work on consolidating our posts, STEVE!, lol. Shussshhh, dont tell anyone, there is an edit button 
-Dustin-
-Dustin-
Last edited by Bersaglieri; Nov 28, 2004 at 01:21 AM.
Registered User
Joined: May 2002
Posts: 622
From: Nashville, TN
Re: z28 vs. mustang bullitt
Originally Posted by Steve Y
A bone stock 4.10ed '96-01 Cobra will not hit 12s! Prove it! MMFF had a bone stock '97 Cobra that ran 13.7. They added 4.56 gears and it ran 13.5. Those guys can drive very well. It takes more than just 4.10s to put a Cobra in the 12s. So a bone stock 99+ GT with 4.10s and Nittos will hit 12s? BS. Prove it again. They need a few more mods than that.Jason
Registered User
Joined: May 2001
Posts: 97
From: Reno, NV
Re: z28 vs. mustang bullitt
Originally Posted by mebanditws6
I believe I reiterated in a previous post that a 99 or newer GT with 4.10's and bolt ons can hit 12's, same with a 96-01 Cobra.
Jason
Jason