Track Kill Stories Race Track Victories, 1/4 Mile Times, Dyno Numbers - DRIVE RESPONSIBLY

99-04 Mustang GT vs 1994 Z/28

Thread Tools
 
Search this Thread
 
Old Apr 19, 2005 | 10:22 PM
  #1  
Bersaglieri's Avatar
Thread Starter
Registered User
 
Joined: Sep 2003
Posts: 5,907
From: The Wild West
99-04 Mustang GT vs 1994 Z/28

Well I was just cruising around minding my own business when I Mustang flew up beside me at the light, he barely stopped actually. He had the Anniversary emblems on the side and a GT emblem on the back. I also notice the intercooled duals coming out the back, so he wasnt exactly stock. At first I wasnt in the mood so I just drove normally, but after recieving a snotty look or 2, I was ready to make a point.

We stopped a few lights down and I saw him look over and grin. "Grin as much as you want now buddy", I thought, "cause you wont be in about 10 seconds." Sure enough the light went green and we were off, me easing into WOT, him going all out. Through first gear he lost ground, his bumper to my door, then my beloved 2nd hit and he immediately relocated a few feet behind my bumper. I let off 1/2 through second since he knew now he'd been beat. He came up beside and I gave him a small salute, he grinned with a silent 'fast ride' nod and drove away.

A nice clean run, I had 2 other people in the car adding about 400-450lbs of extra weight, so I figure I also had about 4 tenth handicap. His car had only the driver. Not sure of his mods, but at least the exhaust, Borla or Edelbrock looking. I couldnt tell if he was Auto or Manual. My mods in sig.

-Dustin-
Old Apr 19, 2005 | 10:41 PM
  #2  
MarkyMark's Avatar
Registered User
 
Joined: Feb 2003
Posts: 958
From: Fort Wayne, Indiana
Re: 99-04 Mustang GT vs 1994 Z/28

You may wanna get yourself a higher stall torque converter before you go get heads/cam. Higher stall torque converter will be my next mod for sure....thinking along the lines of an edge 3200 stall....then its on to fuel system (pump, injectors) then some suspension, then heads and cam for me. All the power in the world wont help ya if ya cant get it to the ground.

Oh, and I think you will mollywhop the cobras ***!!
Old Apr 19, 2005 | 11:14 PM
  #3  
JBird33's Avatar
Registered User
 
Joined: Nov 2004
Posts: 237
From: Redding, CA
Re: 99-04 Mustang GT vs 1994 Z/28

Originally Posted by MarkyMark
You may wanna get yourself a higher stall torque converter before you go get heads/cam. Higher stall torque converter will be my next mod for sure....thinking along the lines of an edge 3200 stall....then its on to fuel system (pump, injectors) then some suspension, then heads and cam for me. All the power in the world wont help ya if ya cant get it to the ground.

Oh, and I think you will mollywhop the cobras ***!!
LOL, what???
Old Apr 20, 2005 | 06:52 AM
  #4  
Antz97ZNJ's Avatar
Registered User
 
Joined: Sep 2000
Posts: 3,223
From: Browns Mills, New Jersey
Re: 99-04 Mustang GT vs 1994 Z/28

Good Kill
Old Apr 20, 2005 | 10:43 AM
  #5  
MarkyMark's Avatar
Registered User
 
Joined: Feb 2003
Posts: 958
From: Fort Wayne, Indiana
Re: 99-04 Mustang GT vs 1994 Z/28

Originally Posted by JBird33
LOL, what???
That was meant for his other post......I am kinda confused how I posted it here.......lol.
Old Apr 21, 2005 | 04:29 PM
  #6  
Fallstar01's Avatar
Registered User
 
Joined: Mar 2005
Posts: 2
From: Philadelphia, PA
Re: 99-04 Mustang GT vs 1994 Z/28

good kill.
I don't know what intercooled duals are but I'm assuming you mean he had an aftermarket cat-back exhaust. Intercoolers are for the intake, not the exhaust.
Old Apr 21, 2005 | 05:15 PM
  #7  
1fastformula's Avatar
Registered User
 
Joined: Jul 2000
Posts: 305
From: South Louisiana
Re: 99-04 Mustang GT vs 1994 Z/28

Originally Posted by Fallstar01
good kill.
I don't know what intercooled duals are but I'm assuming you mean he had an aftermarket cat-back exhaust. Intercoolers are for the intake, not the exhaust.

Old Apr 21, 2005 | 08:57 PM
  #8  
Bersaglieri's Avatar
Thread Starter
Registered User
 
Joined: Sep 2003
Posts: 5,907
From: The Wild West
Re: 99-04 Mustang GT vs 1994 Z/28

Originally Posted by Fallstar01
good kill.
I don't know what intercooled duals are but I'm assuming you mean he had an aftermarket cat-back exhaust. Intercoolers are for the intake, not the exhaust.
The type of dual pipes that have a inner pipe then a outter chrome style pipe around it. I thought I saw them advertised as intercooled tips.

Like this, 3 pics down.

http://www.stangnet.com/sema2000/steeda1.html

I know what an intercooler is. The fact that is was aftermarket was assumed.

-Dustin-

Last edited by Bersaglieri; Apr 21, 2005 at 09:01 PM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
brothaslide
2016+ Camaro News, Sightings, Pictures, and General Discussion
6
Jan 9, 2016 12:11 PM
scottcba1
Cars For Sale
1
Sep 8, 2015 09:52 AM
john henry
New Member Introduction
1
Aug 14, 2015 08:33 AM
john henry
Classic Engine Tech
1
Aug 14, 2015 08:33 AM
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
1
Jul 8, 2015 06:47 PM




All times are GMT -5. The time now is 11:41 AM.