Popping in front end please help!
Thread Starter
Registered User
Joined: Jun 2003
Posts: 503
From: atx
Popping in front end please help!
Just replaced all control arm bushings and tie rods. Ball joints looked fine and rack and pinion looked fine.
Everytime i come to a stop then accelerate it pops in the front end. It seems to do that with only a load (acceleration) and not decel. At speeds of less than 10 in first gear. A few times shifting into 2nd too.
Ive searched many boards but never could find any answers.
Possible rack and pinion mounting bushings?
96 T/A 86k miles
Everytime i come to a stop then accelerate it pops in the front end. It seems to do that with only a load (acceleration) and not decel. At speeds of less than 10 in first gear. A few times shifting into 2nd too.
Ive searched many boards but never could find any answers.
Possible rack and pinion mounting bushings?
96 T/A 86k miles
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM