I just put my 9" and my Sphoon LCA,adjustable panhard bar, Trq Arm,sway bar and starnge rear shocks on, the car sat up way too high in the rear. I took out the rubber insulator a little better but still to high. I was running Eibach drag springs and they always set up a little high see sig pic. But after those mods it was way too high. So i took them out and installed a set of stock ls1 springs with no Insulator still, now the car is way jacked up, like i can stick my whole head in between a 28" DR and the QTR panel. Nothing is binding, i took the car out for a spin around the parking lot and it still sits the same. I'm about to start cutting these srpings up but would like to avoid doing that.
any input would be apriciated.