my suspension set up(drag/street)?
Thread Starter
Registered User
Joined: May 2006
Posts: 592
From: new orleans, la
my suspension set up(drag/street)?
Here's the setup I am planning for street/strip duties. Car is not a dd, only driven on weekends with a few track visits/year.
HAL drag launch springs in front with Bilstein shocks(already on car).
In rear, QA1 coilovers and Strano 25mm hollow swaybar.
How will this be for dual purpose? I figure the swaybar in back and Bilsteins up front would keep the front and back closer as far a stiffness for the street, and the coilovers, HAL springs and pre-loading the suspension with the swaybar can help me launch straight and help transfer weight for better traction.
How will it sit? Coilovers give about 1" drop, but the 12 bolt(when I get it) should help balance this out a little to help the car sit more level.
Drag/Street guys please critique my proposed setup.
HAL drag launch springs in front with Bilstein shocks(already on car).
In rear, QA1 coilovers and Strano 25mm hollow swaybar.
How will this be for dual purpose? I figure the swaybar in back and Bilsteins up front would keep the front and back closer as far a stiffness for the street, and the coilovers, HAL springs and pre-loading the suspension with the swaybar can help me launch straight and help transfer weight for better traction.
How will it sit? Coilovers give about 1" drop, but the 12 bolt(when I get it) should help balance this out a little to help the car sit more level.
Drag/Street guys please critique my proposed setup.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
Trevor98ramair
Drag Racing Technique
1
Jul 31, 2002 02:43 PM