Hey guys. I need to remove the e-brake cables from my car, while still leaving the calipers attached to it. I'd like to remove the entire assembly and transfer it over to another car. I was looking at it yesterday, not sure how its done. Need help.

Thanks a lot guys.

 

release tension from the outside half moon gear on the e-brake handle, take off the rear wheels, unhook wheel cables from hook on caliper, use pliers of some sort to squeeze fitting at the bracket on caliper (do this to each side), in the center of the car above the driveshaft disconnect from the 'y', use pliers again to take all the fittings out of their holders (may require cussing), detach the cable from the e-brake handle and pull all 3 out.