i bought and installed some eibach sway bars cause i wanted to eliminate the body roll when i take turns when im at the track. i was wondering since the rear seems a lot stiffer am i susceptible to spinning during a hard turn or existing a hard turn, and if so what could i do to prevent that.

 

Why not ask someone at the track what works well before randomly buying parts? A lot of guys say Sam Strano knows his stuff, why not give him a call? I would, if better cornering was my concern.

 

no one at the track is running the same car that i have so i aint gunna get no help from them that why i asked here. i heard that a not so stiff bar in the back may help but i aint sure about that. im just trying to give the four wheels drives some competition cause they ***** me off

 

Eibach bars aren't that well known here. We could give more input if we knew the sizes and whether they are solid or hollow.
But the answer seems obvious. If the car's balance seems overly stiff in the rear you can either put a stiffer bar up front or a softer bar in back.

 

Like I said, give Sam a call.