bolt in roll bars
Registered User
Joined: Dec 2003
Posts: 202
From: San Diego
Originally posted by simple
correct me if i'm wrong but bolt in roll bars are more expensive then weld in and they still wont be legal at the track, especially at the power levels listed in your sig
correct me if i'm wrong but bolt in roll bars are more expensive then weld in and they still wont be legal at the track, especially at the power levels listed in your sig
Check out Jegs.. Weld-in rollcages custom made for our cars $150 + shipping
Thread Starter
Registered User
Joined: Dec 1969
Posts: 796
From: Dallas, TX USA
are you talking about this one?
http://www.jegs.com//cgi-bin/ncommer...07&prmenbr=361
http://www.jegs.com//cgi-bin/ncommer...07&prmenbr=361
Registered User
Joined: Dec 2000
Posts: 2,442
From: Tacoma, WA, USA
Originally posted by slp223
are you talking about this one?
http://www.jegs.com//cgi-bin/ncommer...07&prmenbr=361
are you talking about this one?
http://www.jegs.com//cgi-bin/ncommer...07&prmenbr=361
Moderator
Joined: Jul 1998
Posts: 6,247
From: Charlotte,MI USA
Keep in mind that this kit consists of the prebent hoop, the floor plates, and a pile of jig notched straight pipes. It's not all prebent and precut like the Wolfe bar.
I just put the Jegs one in my car. Tons of extra work, with a pipe bender, and a means to cut the pipes.
I just put the Jegs one in my car. Tons of extra work, with a pipe bender, and a means to cut the pipes.
Thread
Thread Starter
Forum
Replies
Last Post