Abs
#4
Common failures of the ABS system include burnt harnesses to the front sensors (harness plug into the whell hubs) or a dirty rear sensor (mounted in the top of the differential if your car doesn't have traction control) and dirty sensors at the rear wheels (reluctor near the brakes if you have traction control).
#6
my inop light was on . the brakelight on my hatch was burnt out , so i put a new bulb in it and the inop light went off . i dont know if the burnt bulb had anything to do with the inop light , but the light went off and stayed off .
Thread
Thread Starter
Forum
Replies
Last Post