Okay, guys. Now that we have a guaranteed delivery policy on our engines, it is time to put it into effect.

Ready for this?

All of our shortblocks are $500 off! This is for all orders placed between September 16, 2004 and September 24, 2004.

Here are the basic prices for LT1 short blocks:

Cheap Street 355 LT1 - $2,000 +core charge of $300
Eagle ESP crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Michigan 77 Main Bearings, Clevite Rod & Cam Bearings, ARP main studs

Cheap Street 383 LT1 - $2,300 +core charge of $300
Eagle ESP crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Michigan 77 Main Bearings, Clevite Rod & Cam Bearings, ARP main studs

Cheap Street 396 LT1 - $2,900 +core charge of $300
Eagle forged crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Michigan 77 Main Bearings, Clevite Rod & Cam Bearings, ARP main studs

Call for additional LT1 option information.

Here are the basic prices for LS1:

Cheap Street 347 - $2,299 +core charge of $850 - (370-500 flywheel hp depending on head and cam pkg.)
Polished/Magnafluxed crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs

382 Short block - $3,350 +core charge of $750 - (500-550 flywheel hp depending on head and cam pkg.)
Eagle forged crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs

382 Short block - $3920 +core charge of $750 - (500-550 flywheel hp depending on head and cam pkg.)
Callies forged crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs

408 Short block - $3920 +core charge of $650 - (550-600 flywheel hp depending on head and cam pkg.)
Callies forged crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs
(This is the same shortblock featured in the September 2004 issue of Chevy High Performance magazine!)

427 Short block - $6,999 - no core charge! - (600+ flywheel hp depending on head and cam pkg )
Darton Wet Sleeve Block, Callies forged crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs

ADDTIONAL LS1 SHORT BLOCK OPTIONS:
Custom Grind Camshafts - $350.00 (w/short block order)
Custom Pistons for higher boost/N20 levels - $150
Callies rod upgrade - $350
Cloyes adj. timing chain set - $150.00
JWiss Ketton C5R timing chain - $155.00
APE Ported and Coated Oil Pumps - $155.00 (w/short block order)
ARP Head Studs - $219.00
ARP L19 Head Studs (limited supply) - $450.00
Install front, rear cover & oil pan - (no charge for labor, but must buy gaskets or send them to us)

All of these above blocks are fully machined, balanced, blueprinted and assembled. Of course, shipping charges vary.

All short block prices can carry over to a long block assembly. If you don't see what you want, just give us a call to get a custom engine built. We can make it happen.

NOBODY has an engine with the same quality components we use for these prices, and NOBODY has our delivery guarantee. In case you didn't hear about our new engine delivery guarantee...when you leave a deposit to have us build your engine, we will give you a date that the engine will ship. If we do not ship your engine by that date, your engine is 100% FREE, shipping and all. Guaranteed delivery times vary by how many orders we have at the time, but the sooner you get your order in, the less the delivery time will need to be. So...who thinks they are going to be the first to get a free motor? Give us a call.

 

Very Nice

 

Damn...and right after I bought all of the interals from you guys and had them shipped out to me. Oh well...thanks for the great service. I can't wait to get the parts in the mail.

-Sean

 

Those are some great deals!!

 

Rat, it's about time for you to come get one

 

 

 

If I could get a boat that has been eating at me off my mind for a little while I would. Its getting colder and I havent found the right one as of yet....so maybe! 427

 

APE, you guys have a PM. lmk, Thanks.

 

Do you have a warranty with these eng's...

What is the C ratio of the 383/396


What are the parts rated for HP & rpm
Is the eng balanced
Do you sell oil pan's & oil pump's (HV)
windage tray
How much spray could this set up take
What is the rod 5.7" or 6" and how many grams
pistons are they light weight 2VR, how many grams

thx

 

How about a fully forged LT1 with 4 bolts and callies rods and dragonslayer crank?

 

So the LS1 guys have their HP gain ratings right there. What about the LT1. Should we just subtract 50? hehe

 

This ends today! If you have any questions that we have missed, please give us a PM or a call.

 

Those are some awesome deals there .

I have 1 question thoough do guys only deal with complete shortblocks or is it possible for me to order a complete and fully machined block for a 383 with just the the the mains,studs and bearings. No Rotating assembly.

THanks,
-john

 

Couldn't have done this in March when I ordered my motor huh?? If I had the money I'd ****** up a spare from ya though, those are KILLER prices!!!