Ok guys, You have been asking and we have been listening.

We designed a LT1 plate over a year ago. After releasing it the sales were not what we needed to keep the production going. However shortly after cancelling the part number we started getting alot of phone calls and emails from people wanting the plate system. So we listened and now is your time to step up to the plate and show us that keeping this part number alive for the LT1 enthusiest is supported by you.

We need 10 orders to be able make this deal happen. This will show us that there is a call for the LT1 plate system. We will then go to production and put the LT1 plate back on the market and keep them instock. Show us you guys are serious!!!

Ok this is the story behind the LT1 plate system.

Back about two years ago we started playing with the idea of a nitrous plate for the LS1 and LT1 community.
We were not happy with the current plate design's that were on the market. The current plate designs placed a plate or nozzles behind the throttle body aimed at the back of the intake. By placing the discharge so close to the front runners and aimed at the back of the intake there was the chance of over powering the back runners and missing the front.

So we went on the quest to develope a plate that would give a nice sexy look and properly attomize to all cylinders. After scraping many plates and throwing away many different desighns it finaly happened. A year later we had came up with a design that would attomize well and looked sexy!!!!

Here is how our design works.

In this picture you will see the distribution ports in the plate. This design works by using 4 nitrous ports and 4 fuel ports in each throat opening. The nitrous and the fuel will slam together and create a plumb spraying across the intake port.(NOT AT THE BACK OF THE INTAKE) Then the induction of the motor will pull the mixture into the intake plenum.



This is the full plate conversion. Consist of Billit Plate, gasket, Throttle extention bracket, 50-200 hp jetting, all hardware


This is a complete system picture. System comes complete with a bottle capable of flowing 800hp with accessory ports in the side of the bottle valve, 300 hp purge port design solenoids, Stainless quick release bottle brackets, 16ft main feed line, plate conversion, all hardware etc.


The plates will be comming annodized black with our logo laser etched in. Like this.



Ok So here are the details on this group purchase.

We need a total of 10 orders. It can be in a system form or conversion form. You have your choice of 52mm or 58mm.
It will take ruffly 3-4 weeks from the time the special ends for us to be able to ship the product.


Regular prices are.
Conversion=285.00
System=699.99

This is the special price's
Conversion= 250.00
System= 599.00

You can call in your order toll free at
1-866-648-7637
Local is 254-420-3630

Thank you for support.
Ray

 

Never heard anymore more on the LT1 plate besides rude jokes. You said something about a two stage maybe?

 

Will keep this list updated as orders come in.

http://web.camaross.com/forums/showp...4&postcount=10

 

7 orders placed

 

How will this affect the cables on a 93 z28 since there is a kickdown cable for the transmission?

 

what about guys running a monoblade?

 

those guys are fast enough already....




but seriously, I will get with Dave tommorrow, but at the moment we do not have a specific plate for the monoblade.

 

i would appreciate the follow up. fast enuff....hmmm never! lol!

thanks!
taner

 

Wow. I must say the LT1 guys really steped to the plate on this. You guys rock!!!!We had more than enough orders to go to production the same week this post started. The order is in and we are waiting on the machine shop at this point. Do to the responce and support we will be bringing this part number back to life.

For the guys that did not pre order. You can still place your order and get the discounted price till the end of next week. MARCH the 23rd is the deadline on this special.

Thank you guys for all the support.

 

Haven't forgot about ya'...we are going over what all will have to be changed to make a monblade version....will let you know ASAP.


Would be nice to power the 2 fastest nitrous LT1's

 

Will this system mate up to the Holley 58mm throttle bodies as they have a slightly different pattern than the BBK or summit style? Thanks.

 

I don't see any reason why it would not work....the plate lines up with the mounting bolts on the intake and the bore is centered on the intake.

 

Taner I called them today, I need a Plate for my Monoblade setup as well. They may do a limited production for us. That would be great, keep us posted Fella's.
Thanks Ben Charles

 

ray,

most of us lt1 guys realize we are the "forgotten" bunch, but we haven't lost the desire to go fast!

 

Did you get the PM......

If we can get 5 monoblade orders we can match the GP price...or they will be $310 each