I think many of you know that these are tough to come by because they have to be made in batches. As a result, let's try another GP to get another batch done for the original C5 to F-Body front brake conversion brackets!

http://www.speedspecialty.com/store/...=c5fbodybrakes

These were formerly known as "Bob Bishop Brackets" and now known as F-Body TrackBrackets. Bob is no longer involved in these brackets, however his exact design and specs have been passed on so that they can be made once again using the exact same design, tolerances, material, hardware, and manufacturing process...right down to the packaging. Many of you know how well the brackets were engineered and tested far beyond reason. The unmatched quality and craftsmanship of these brackets have proven themselves time and time again.

So once again, let's try to get a GP going. We can't say there won't be another GP on these, but we can't say there will. We are going to break this down into two levels:

If we sell 11 sets = $279 per set (Plus shipping)
If we sell 22 sets = $269 per set (Plus shipping)

We are looking into the production schedule at this time, and it could take approximately 2-4 weeks to have them made once a final amount is determined.

So right now we need to know if we can even get enough sets "pre-sold" to make this happen.

Please reply to this thread or e-mail us at sales@speedspecialty.com if you 100% definitely will purchase at least one set of these brake brackets. If you plan to buy more than one, please indicate this in your post. Once again, we need DEFINITE buyers only who can pay with credit card or PayPal as soon as we give the green light on this (which we cannot do until we are SURE we have 11 or 22 DEFINITE sets that will be sold). We also ask that if you know someone who is interested in this to please forward this information to them to increase the odds of this happening.

If you have any questions, feel free to post them or e-mail us. Once again, we are very happy to be bringing these to you again. Thanks!

So, let's get the list started! We need to know if this is going to happen SOON, so please don't hesitiate.

 

1) (via e-mail)





(Next in line, copy this post and add yourself to the list as the next number)

(10 or 21 more to go!)

 

1) (via e-mail)

2) I am in 100% for 1 set. Sent you email with my contact info.



(Next in line, copy this post and add yourself to the list as the next number)

(9 or 20 more to go!)

 

1) (via e-mail)

2) I am in 100% for 1 set. Sent you email with my contact info.

3) iam there!!! 1 set nitroracing@msn.com you e-mailed me

(Next in line, copy this post and add yourself to the list as the next number)

(8 or 19 more to go!)

 

1) (via e-mail)

2) I am in 100% for 1 set. Sent you email with my contact info.

3) iam there!!! 1 set nitroracing@msn.com you e-mailed me

4) two sets for me (I also emailed you so only count once)

(Next in line, copy this post and add yourself to the list as the next number)

(6 or 17 more to go!) (Unless I am the number 1 via email above)

dabbene@adelphia.net (Detail Driven)

 

Re: Let's do another C5 to Fbody front brake conversion brackets (Bishop)! LIMITED GP

--------------------------------------------------------------------------------

1) (via e-mail)

2) I am in 100% for 1 set. Sent you email with my contact info.

3) iam there!!! 1 set nitroracing@msn.com you e-mailed me

4) two sets for me (I also emailed you so only count once)

5) One from the other list (dexter)

(Next in line, copy this post and add yourself to the list as the next number)

(5 or 16 more to go!) (Unless I am the number 1 via email above)

 

Still waiting to hear back from the PM I sent you...

 

My emails aren't getting returned either.

 

Don't worry everyone, we are here and will be updating this thread and finishing up on the e-mails and PMs later today. We got flooded with questions. Sorry for the delay.

 

ProjectCamaro, I got your PM but I don't think I got an e-mail from you. At least not that I can tell, nothing that says "ProjectCamaro" in it. I have no other way of knowing which e-mail was yours.

 

As a side note, you can use this kit to install the C6 Z06 front brakes or the C6 Z51 front brakes (13.6" for the Z51 and 14" for the C6 Z06). If you want to upgrade to the C5 brakes, the C6 Z06 or the C6 Z51 brakes, you can do it with this kit.

 

Okay, let's clarify the list a bit...

-----------

1) Dexter (from other list)

2) PoorMan (Posted in this thread)

3) blackz151 (Posted in this thread)

4) Happy_Dan (Posted in this thread)

5) Happy_Dan (Posted in this thread)

(Next in line, copy this post and add user name to the list as the next number)

(6 or 16 more to go!)

 

Okay, let's clarify the list a bit...

-----------

1) Dexter (from other list)

2) PoorMan (Posted in this thread)

3) blackz151 (Posted in this thread)

4) Happy_Dan (Posted in this thread)

5) Happy_Dan (Posted in this thread)

6) swagge1 ( also sent an e-mail)

(Next in line, copy this post and add user name to the list as the next number)

 

And just to keep the count current. 5 or 15 more to go!

Thanks guys!

 

So which other parts would you need in order to do the conversion besides rotors and calipers?