I have worked with a shop to get a couple of these made. I have 1 set left and am ready to ship it out.

CNC'ed Jounce bumpers w/replacable poly bumpers and possible slight bending of lip(arrow in pic) to bolt up (bending might be needed to clear your rims depending on each car's set up)
.




Just let me know if you want a red or black snubber.

$55 shipped

 

I'm interested, my bump stops crumbled off awhile ago.

 

I'm in. Just let me know if the GP is a go.

 

Guy is going to make a few more of the bases this week.

 

ill get a set in red send me a pm when they are ready for order

 

I would also like a set in red when they are available.

 

i don't want these, but i would take a set of the stock ones from someone that gets these

 

one vote red count me in, mine umm trust me you wouldn't want my stock ones

 

Once I get the plates, should be this weekend, I will post a link to the website so we can get thise going.

 

I'm in for a set too. Red is OK.

 

FYI: 3rd gen bumpstops fit 4th gens, and are made of a different rubber that doesn't deteriorate as quickly. I got a set from the junkyard, and they seem to be made of real rubber, where as the 4th gen's are like a foam-rubber. Holding up great!

 

I have another set of brackets here and 7-8 more being cut next week.
These offer replacable snubbers you can pick up at Advance Auto or AutoZone for like $10 but I really doubt you will be replacing these any time soon, the stock rubber units will be replaced several times before the poly units will need to be replaced.
If the snubbers end up being too tall and do not offer enough suspension travel you can cut the snubber to offer more travel but really doubt you will need to do this.

$55 shipped, just let me know if you need red or black snubbers.

 

Do you still have a set of these?

 

yes, red or black?
pp me $55 at shon@herronperformance.com

 

I just did.
Please send them in red. I wil PM you with the shipping adress. thanks
RH