Two free stock exhausts (one has cut-out)
Free to a good home: One complete 95 Z28 exhaust system including the manifolds if anyone needs them. This also includes y-pipe, cat, i-pipe w/ cut-out, over-the-axle, and rear section. I also have the muffler back section of a 99 T/A exhaust-->the single chrome d/s pipe style. They're going to the scrap yard at the end of the week. My email has changed GTScamaro450a@aol.com
------------------
Black 95 Z28. Chrome Z-5 spks, MSD coil, BBK shytty headers, 2800 Vigilante, CAI, free mods, !MAF, !ESC, !CAT, !AIR, !EGR, !21 bolts, Ken's Perf. tranny, 13.05/105.5 before following mods.
Complete 3.73 rear end w/ T/A girdle,LT4 HOT cam,springs,1.6 Comp cams RR's. New times to come
------------------
Black 95 Z28. Chrome Z-5 spks, MSD coil, BBK shytty headers, 2800 Vigilante, CAI, free mods, !MAF, !ESC, !CAT, !AIR, !EGR, !21 bolts, Ken's Perf. tranny, 13.05/105.5 before following mods.
Complete 3.73 rear end w/ T/A girdle,LT4 HOT cam,springs,1.6 Comp cams RR's. New times to come
I will probably take it for my buddy, he needs an exhaust on his 95 TA
------------------
2000 T/A M6
Intake
FTRA,Direct Flow(Fram),GMS MAF,Fernco 3x3 coupler, Ported Throttle Body, LS6 Intake.
Exhaust
MAC Headers w/offroad pipe, SLP Loudmouth
Engine
MTI T1 Cam, Comp Cam 941 Springs w/Lunati Titanium retainers/chromoly pushrods, ASP Pulley,
Suspension
BMR trak pak + relocation brackets, Eibach Lowering kit.
Misc.
B&M ripper, HPP3 (6600 RPM's, 160 t-stat), Decals, Cartek Clutch!, Strange 12 bolt w/3.73's "soon to be 4.30's"
Waiting to be installed:
Stage 2 Heads "Scott Jantzer", BMR K-Member
------------------
2000 T/A M6
Intake
FTRA,Direct Flow(Fram),GMS MAF,Fernco 3x3 coupler, Ported Throttle Body, LS6 Intake.
Exhaust
MAC Headers w/offroad pipe, SLP Loudmouth
Engine
MTI T1 Cam, Comp Cam 941 Springs w/Lunati Titanium retainers/chromoly pushrods, ASP Pulley,
Suspension
BMR trak pak + relocation brackets, Eibach Lowering kit.
Misc.
B&M ripper, HPP3 (6600 RPM's, 160 t-stat), Decals, Cartek Clutch!, Strange 12 bolt w/3.73's "soon to be 4.30's"
Waiting to be installed:
Stage 2 Heads "Scott Jantzer", BMR K-Member
Hey willyboy, another board member already claimed them, but if he changes his mind I'll let you know first.
------------------
Black 95 Z28. Chrome Z-5 spks, MSD coil, BBK shytty headers, 2800 Vigilante, CAI, free mods, !MAF, !ESC, !CAT, !AIR, !EGR, !21 bolts, Ken's Perf. tranny, 13.05/105.5 before following mods.
Complete 3.73 rear end w/ T/A girdle,LT4 HOT cam,springs,1.6 Comp cams RR's. New times to come
------------------
Black 95 Z28. Chrome Z-5 spks, MSD coil, BBK shytty headers, 2800 Vigilante, CAI, free mods, !MAF, !ESC, !CAT, !AIR, !EGR, !21 bolts, Ken's Perf. tranny, 13.05/105.5 before following mods.
Complete 3.73 rear end w/ T/A girdle,LT4 HOT cam,springs,1.6 Comp cams RR's. New times to come
Its cool
So hows your car running by the way?
I am getting some S2 heads installed this week or next and probably within that time frame, gonna throw my 4.10's in.
If ya dont remember, I was the guy with the white TA autotapping my car at the red light.
Peace.
So hows your car running by the way?
I am getting some S2 heads installed this week or next and probably within that time frame, gonna throw my 4.10's in.
If ya dont remember, I was the guy with the white TA autotapping my car at the red light.
Peace.
Hey Willyboy, yeah I remember. My car isn't running all that well and I'm running on extremely limited funds right now. The main reason it's running poorly is I bent the pushrods @ the last midnight street races @ OSW. It was running great before that. I'm also starting to worry about the tranny, but I'm hoping it's all in my head. Oh, on top of that, I'm missing an exhaust pipe from the muffler back due to a broken weld, so I've got to get that fixed as soon as I can afford the new muffler. Catch you later man.
------------------
Black 95 Z28. Chrome Z-5 spks, MSD coil, BBK shytty headers, 2800 Vigilante, CAI, free mods, !MAF, !ESC, !CAT, !AIR, !EGR, !21 bolts, Ken's Perf. tranny, 13.05/105.5 before following mods.
Complete 3.73 rear end w/ T/A girdle,LT4 HOT cam,springs,1.6 Comp cams RR's. New times to come
------------------
Black 95 Z28. Chrome Z-5 spks, MSD coil, BBK shytty headers, 2800 Vigilante, CAI, free mods, !MAF, !ESC, !CAT, !AIR, !EGR, !21 bolts, Ken's Perf. tranny, 13.05/105.5 before following mods.
Complete 3.73 rear end w/ T/A girdle,LT4 HOT cam,springs,1.6 Comp cams RR's. New times to come
I know how it is to be money hungry on funding the ride.
I actually got a deal I coulnd't turn down on the heads and ended up getting for free in a way "even trade off for a laptop".
Hope to see ur car runnin again after you get them pushrods fixed.
I ran on my car for a few days with the bent/broken pushrods and I know how it is. Just grab the chromoly ones and you will be set
I actually got a deal I coulnd't turn down on the heads and ended up getting for free in a way "even trade off for a laptop".
Hope to see ur car runnin again after you get them pushrods fixed.
I ran on my car for a few days with the bent/broken pushrods and I know how it is. Just grab the chromoly ones and you will be set
money funding for the ride?
i haven't had reverse gear in a year and a half.
Afterall all races go forward right?
------------------
1994 Medium Quaser Blue Camaro 3.4L V6 w/ 5-speed
Homeade CAI with a huge K&N cylinder filter, Single outlet Flowmaster with resonator, Accel 8mm ignition wires, Rapidfire plugs, 3.42 gears and posi off a 97 WS6, 1 piece steel driveshaft, Converted to 4-wheel disc brakes, 1LE transmision mount, 1LE sway bars, Prothane bushings and endlinks, BMR Strut tower brace, ASP underdrive pulleys, 160* stat
Lightest Weight W/out driver: 3160
15.696@86.22 with a 2.214 60'!
Best R/T .507
Best 60' 2.106
Father's Stock 2000 Navy Blue Camaro 3.8L V6 w/ 5-speed
15.875@88.25 With wheel spin in 1st
15s are cool!
AIM: MustangEater82
i haven't had reverse gear in a year and a half.

Afterall all races go forward right?
------------------
1994 Medium Quaser Blue Camaro 3.4L V6 w/ 5-speed
Homeade CAI with a huge K&N cylinder filter, Single outlet Flowmaster with resonator, Accel 8mm ignition wires, Rapidfire plugs, 3.42 gears and posi off a 97 WS6, 1 piece steel driveshaft, Converted to 4-wheel disc brakes, 1LE transmision mount, 1LE sway bars, Prothane bushings and endlinks, BMR Strut tower brace, ASP underdrive pulleys, 160* stat
Lightest Weight W/out driver: 3160
15.696@86.22 with a 2.214 60'!
Best R/T .507
Best 60' 2.106
Father's Stock 2000 Navy Blue Camaro 3.8L V6 w/ 5-speed
15.875@88.25 With wheel spin in 1st
15s are cool!
AIM: MustangEater82
Thread
Thread Starter
Forum
Replies
Last Post
F'n1996Z28SS
Cars For Sale
8
Aug 23, 2023 11:19 PM



