Orlando guys better watch out for the v6 guys...
Orlando guys better watch out for the v6 guys...
Normally I agree with the v6ers, not dominaing, and they still aren't but their are 2 guys putting up decent numbers.
Shane ran a 12.94 @104.61 at OSW last night no juice, a turboed 3.8L v6 w/ 7 psi. Once again thats off the bottle. He managed a 1.89 60' on drag radials I believe, might have been street tires, either way he is looking to get slicks and jump up to 10 psi.
also there is a guy that helped him fab up his turbo that is running a turbo '00 v6 Mustang, runs mid 12s off the bottle as well.
I know these are not numbers to tremble at like 10s or anything but they are enough to take out alot of guys on this board
Shane ran a 12.94 @104.61 at OSW last night no juice, a turboed 3.8L v6 w/ 7 psi. Once again thats off the bottle. He managed a 1.89 60' on drag radials I believe, might have been street tires, either way he is looking to get slicks and jump up to 10 psi.
also there is a guy that helped him fab up his turbo that is running a turbo '00 v6 Mustang, runs mid 12s off the bottle as well.
I know these are not numbers to tremble at like 10s or anything but they are enough to take out alot of guys on this board
That’s cool. Turbo Technology is one way to make some serious horsepower. I would love to turbo my LT-1… Run around 500HP would be cool… Who knows what will happen when I pay it off. I think a 383 rebuild is what I will do.
Not as exciting but my old 2.8 camaro ran 16.01, 15.9… Better than most stock 3.8’s or modded ones in our buddy John’s case.
Not as exciting but my old 2.8 camaro ran 16.01, 15.9… Better than most stock 3.8’s or modded ones in our buddy John’s case.
Thread
Thread Starter
Forum
Replies
Last Post
chstitans42
General 1967-2002 F-Body Tech
7
May 1, 2015 01:03 PM



