ok here is the deal...my friends garage caught on fire last night...and the car was inside..it's a 1987 corvette with a less than 4,000 mile zz4 roller cammed, 4 bolt main small block..with a comp cams 224/230 "516/"516 112 lsa cam,a brand new tpis miniram with bbk 52mm throttle body and A.F.P.R. also 24lb svo injectors,fully ported zz4 alluminum heads,comp pro magnum 1.52 roller rockers,T.P.I.S. longtubes,bbk crank pully,TCI street fighter 700r4 with tci 3500 stall converter,original zz4 roller cam 208/221 "474/"510....way too much to list...weld draglites 26*3.5/15's for skinnies up front,davis D.U.I. distributor with dyno mod coil built in,T.P.I.S. 3 inch y-pipe,dyno-max rear y-pipe with flowmaster 40-series welded to both sides,brand new aluminum radiator.all of these things are in perfect condition..the fire burned the whole outside of the car,melted all the fiberglass and everything...but whole drivetrain was untouched!!!so we are just gunna part the car out so he can get a new ride as soon as possible...if not he will have to get a honda or something!!!cant let that happen..so start buyin! lol all of these parts will be available very soon..approx. one week...we are currently pulling the motor,trans,ect.....later,
carter

------------------
'2000 onyx z28
stock heads,intake,bottom end...and all motor! 11.63@116.04 1.54 60'.....on nx 125 wet..11.01@126 with a slipping tranny...new times soon.

 

carter-
Is this stuff from Eric's car. Either way sorry to hear it. Let me know if I can help you all this weekend.

Matt383

 

hey matt,
yeah it's all from erics car...that thing is completly toasted...we pulled the heads,cam,longtubes,and the whole exaust off today...they all look untouched by the fire...but the damn hood and all the paint,two front tires popped,burned half the suspention.....but there are alot of salvagable parts left.thanks for the help but there isnt much left to do..just pull the motor & tranny...but we will have that done by tomorrow...but if you can let everyone know at robbie's shop and also let them know alot is for sale that would be most appreciated...thanks man.later,
carter

------------------
'2000 onyx z28
stock heads,intake,bottom end...and all motor! 11.63@116.04 1.54 60'.....on nx 125 wet..11.01@126 with a slipping tranny...new times soon.

 

hey carter, i may be interested in the distributor/coil/module if its an hei ignition. also, lemme know how much for the converter!!!
maybe we could work a deal...
thanks
brian

 

hey brian,
the distributor is an hei...but the is no vacume advance...i do have a brand new hei vacume advance zz4 distributor though..never even used...i'll take 100 bucks for the zz4 and 120 for the davis..let me know man,
carter

------------------
'2000 onyx z28
stock heads,intake,bottom end...and all motor! 11.63@116.04 1.54 60'.....on nx 125 wet..11.01@126 with a slipping tranny...new times soon.

 

Carter you've got mail. And if you and Eric need any help give me call.

James

------------------
1991 Lust Red Camaro B4C
13.4 at 100mph
Cffb # 143
K&N air filter modified air box, Flowmaster cat-back, cut out, 4.11 gears, Carbon Fiber drive shaft,BFG's G-Force KDW's Tires =)and Nitto 555R Drag Radils, Crane Cams: Cam shaft, 1.5 Gold series roller rockers s/a, hardened pushrods, lifters, chain assembly, and valve springs,and custom JET Chip, A Yank 2,500-2,700 stall conv. .
2 sony explod 12's, legacy 1,000 watt amp
"Friends dont let friends drive RICE!" "If you cant race it or take it to bed its not worth having!" "All Throttle no Bottle Baby"

 

hey,
the 52mm throttle body,the 24lb injectors,the mini-ram,and adj. fuel pressure regulator is gone...and the tpis headders.everything else is still for sale