Cost of rear end rebuild? Shops in Orlando?
Thread Starter
Registered User
Joined: Feb 2003
Posts: 439
From: Northern VA
Cost of rear end rebuild? Shops in Orlando?
I'm looking to change out my rear gear from 3.42s to 4.10s. During this, I'm thinking of having the whole deal gone through. What would it cost?
- Install of 4.10s (I'll provide them)
- Install new bearings and seals.
- Possible rebuild of carrier (it turns at 25 ft. lbs, and I think spec is 40?)
- considering rotating spring perches on axle to get proper pinion angle for cruising.
- Axle tubes welded? Worth the trouble for a car running high 12s (with 1.80 short times)?
Any input would be appreciated. Any alternatives to the old standby of Advanced Driveline?
Todd
- Install of 4.10s (I'll provide them)
- Install new bearings and seals.
- Possible rebuild of carrier (it turns at 25 ft. lbs, and I think spec is 40?)
- considering rotating spring perches on axle to get proper pinion angle for cruising.
- Axle tubes welded? Worth the trouble for a car running high 12s (with 1.80 short times)?
Any input would be appreciated. Any alternatives to the old standby of Advanced Driveline?
Todd
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM