Cleaning Out Garage in Jacksonville - Headers/Muffler/Stuff
Thread Starter
Registered User
Joined: May 1999
Posts: 86
From: Jacksonville, FL
Cleaning Out Garage in Jacksonville - Headers/Muffler/Stuff
Time to clean out the gargage again. Most of this stuff would be best for local pick-up as it is bulky / hard to ship. Pic up would be at my house in Northern St. John's County ie. South Jacksonville.
1. Set of PaceSetter Long Tube Headers with 3 Bolt Flanges welded on. These are in good shape with 1 major problem. On the passenger side header the weld broke that holds the EGR fitting on. The AIR connections are still perfect. I replaced these with a set of PaceSetter "Race" headers with no emissions fittings. Someone with some welding skills could weld the EGR fitting back on (I still have it!) and be good to go. I also have a custom welded y-pipe that was made to mate up to the 3 bolt flanges and connect to the stock intermedite pipe. $300 for all of it (includes the PaceSetter gaskets, bolts, O2 extension wire, Brand New Percy's Seal-4-Good 3 Bolt flange gaskets).
2. Magnaflow Muffler with 3" Stainless Steel Tips $100
My car went the time in my sig with just these items and an air lid.
3. Set of 4 Rims and Tires off of my 2002 Chevy Tahoe. These are in great condition and the tires still have a really good amount of tread on them. $200 for all 4.
4. Stock 2002 Trans Am WS-6 Panhard Bar and Control Arms. Free to a good home.
5. Stock 2004 GTO Exhaust System off of my friends car. Only had 3000 miles when it was removed. Free.
If you are interested in any of this stuff please contact me at shawnspeer@comcast.net or call me at (904) 537-7254 (reasonable hours please, we have a new baby at home). I have pictures of everything available if you would like to see any of it before making the drive.
1. Set of PaceSetter Long Tube Headers with 3 Bolt Flanges welded on. These are in good shape with 1 major problem. On the passenger side header the weld broke that holds the EGR fitting on. The AIR connections are still perfect. I replaced these with a set of PaceSetter "Race" headers with no emissions fittings. Someone with some welding skills could weld the EGR fitting back on (I still have it!) and be good to go. I also have a custom welded y-pipe that was made to mate up to the 3 bolt flanges and connect to the stock intermedite pipe. $300 for all of it (includes the PaceSetter gaskets, bolts, O2 extension wire, Brand New Percy's Seal-4-Good 3 Bolt flange gaskets).
2. Magnaflow Muffler with 3" Stainless Steel Tips $100
My car went the time in my sig with just these items and an air lid.
3. Set of 4 Rims and Tires off of my 2002 Chevy Tahoe. These are in great condition and the tires still have a really good amount of tread on them. $200 for all 4.
4. Stock 2002 Trans Am WS-6 Panhard Bar and Control Arms. Free to a good home.
5. Stock 2004 GTO Exhaust System off of my friends car. Only had 3000 miles when it was removed. Free.
If you are interested in any of this stuff please contact me at shawnspeer@comcast.net or call me at (904) 537-7254 (reasonable hours please, we have a new baby at home). I have pictures of everything available if you would like to see any of it before making the drive.
Registered User
Joined: Jul 2001
Posts: 1,655
From: Jacksonville, FL
Re: Cleaning Out Garage in Jacksonville - Headers/Muffler/Stuff
You oughta post this on www.rivercityf-bodies.com
Registered User
Joined: Nov 2003
Posts: 192
From: Orlando,FLA
Re: Cleaning Out Garage in Jacksonville - Headers/Muffler/Stuff
I called you and sent you an email about the headers,Yes I know my S/N is LT1iFiEd but I now have an LS1 
Last edited by LT1iFiEd; Oct 25, 2005 at 04:08 PM.
Thread Starter
Registered User
Joined: May 1999
Posts: 86
From: Jacksonville, FL
Re: Cleaning Out Garage in Jacksonville - Headers/Muffler/Stuff
LT1iFiEd - Called you back and left a message on your cell. I am out of town in Boston until Friday. Give me a call on my cell to discuss.
Shawn
Shawn
Thread
Thread Starter
Forum
Replies
Last Post