Well, I figured out my problem, turned out to be programming. I still have some glitches to work out, it's only idle at 450rpms so you can REALLY hear the cam. Many this cam is definitely going to take some getting used to. I can tell the heads (ported flowed 275 intake 195 exhaust)are doing their job as well. I took it for about a 1.5 mile ride and never got over 3500 rpms but man it was MEAN!! The acceleration is brutal. My stall converter feels like it took a 500 rpm hike.....anways, times to come

------------------
95 Black Z28. 13.05/105.5 before following mods.
Complete 3.73 rear end w/ T/A girdle,LT4 HOT cam,springs,1.6 Comp cams RR's. New times to come

 

Sweet, be sure to post times.. Maybe ill se you at the track with my new setup!

------------------
2000 T/A M6


Intake
FTRA,Direct Flow(Fram),GMS MAF,Fernco 3x3 coupler, Ported Throttle Body, LS6 Intake.
Exhaust
MAC Headers w/offroad pipe, SLP Loudmouth
Engine
MTI T1 Cam, Comp Cam 941 Springs w/Lunati Titanium retainers/chromoly pushrods, ASP Pulley,
Suspension
BMR trak pak + relocation brackets, Eibach Lowering kit.
Misc.
B&M ripper, HPP3 (6600 RPM's, 160 t-stat), Decals, Cartek Clutch!, Strange 12 bolt w/3.73's "soon to be 4.30's"

Waiting to be installed:
Stage 2 Heads "Scott Jantzer", BMR K-Member

 

CONGRATS BRO can't wait to see her !!!!

------------------
CFFB#144 1995(Bright RED)Camaro Z28 :MODS: Meziere Electric Water Pump, 160 ' Thermostat, Cutout, MSD 6A, Taylor Wires, MSD Blaster Coil, NGK TR55 Plugs,Enkei Win Wheels 17x9.5 BF Goodrich Comp TA's, Superior Shift Kit, RV Tranny Cooler, and K&N CAI =)
"When I start my car, I want the neighbors to think the world is coming to an end" - Homer Simpson

 

glad to hear she's running! enjoy the lope!!! i will as soon as i get a new opti!!! cant wait for a ride!

 

Well, now I'm running a code 42. I'll check the grounds tomorrow . I'm beginning to get a lil frustrated. Brian @ pcmforless suggested turning my idle screw to get the idle up. Being the college kid I am I'm now officially broke so I'm offering rides for $5 when the car is up and running

------------------
95 Black Z28. 13.05/105.5 before following mods.
Complete 3.73 rear end w/ T/A girdle,LT4 HOT cam,springs,1.6 Comp cams RR's. New times to come

 

Hey man did you have pcmforless.com tune your car? You mentioned something bad with the tuning... I was going to have them do my hotcam tuning.. what cam did you go with ??
Paul

------------------
my93z286spd@yahoo.com
93 Z28 M6-Dynatech LT Headers&Custom 3" True Duals-ETC
01 WS6 Trans Am A4-Stock
91 Talon TSi AWD Turbo-Stock
89 Suzuki GSX-R 750-Lotsa Stuff Done

Brevard Muscle Car Enthusiasts Founder
www.gmmuscle.cz28.com

Street Lethal Performance & F-Body Organization
www.streetlethalperformance.com

Page w/ Mods & Movies !
www.93z286spd.cz28.com

 

you will prolly have to drind a slot in the TPS and then mess with getting the voltage right by rotating it, and then you can get the IAC counts right by opening or closing the TB blades.

BTW I just got my soild roller 396 done, with afr heads 300/225 and a 248/252 110ls cam.

Patrick

 

Hey, the prob w/ the programming was my user error, yes I went w/ the LT4 HOT cam. Already messed w/ the TPS a lil but issue #1 right now is a code 42 that I'm trying to solve

------------------
95 Black Z28. 13.05/105.5 before following mods.
Complete 3.73 rear end w/ T/A girdle,LT4 HOT cam,springs,1.6 Comp cams RR's. New times to come

 

Hey man. I'll give yo 20.00 for your old stock LT1 cam if it's not to beat up. Intrested?