finishing up my hotcam install but i cant get the hub back on! anyone have a hub installer tool? or something that they made in order to get the hub on? i can seem to find a bolt around here that is what i need! if anyone has anything please let me know!! thanks a lot!

 

I have heard boiling it in hot water works...

Tyler

 

yeah i was thinking about heating it in the oven! ive read that on the board before too. i just cant seem to find the bolt i need anywhere! anyone!???

 

Take the bolt to the hardware store and they should be able to get on e for you that's slightly longer (about 1/2") than the current one. You can then use that one to start the hub, and then switch to the regular bolt when it's 1/2 way on.

-Dave C. '97 Z28

PS: You can actually use the original bolt if you oil the crank surface, inside the bolt hole, and inside of the hub and work slowly until it's on a 1/4" or so. I've done that twice. It seems scary when you're only biting 3 threads or so, but I've never had one strip.