I already have a spohn ta, and subframe connectors, i am putting in my 3.73 rear end. I am boxing my control arms and putting in new bushings, and removing my front sway bar while im under there. Any other suggestions for a street/strip app. Not usually a daily driver, but i do drive it around town and to work on occasions. Thanks again Prorac1

 

That sounds good, the only thing left would be a panhard bar.

 

Thanks for the reply. I have given thought about a panhard bar, but upon discussion in another post, i dont think it would do me much good for what i use the car for (mostly drag strip and ocasionally street driving) Thanks for the reply, Prorac1

 

I don't think an aftermarket panhard rod is going to be very effective in a drag racing application.

You may want to install some LCA relocation brackets and of course shocks/springs are always an integral part, although more expensive.

Pay no attention to my beginner drag run times