Procharger P1SC for LT1 F-body
#1
Procharger P1SC for LT1 F-body
Procharger P1SC setup for LT1 F-body. This is a complete kit with less than 5k miles on it. Very nice condition.
-P1SC head unit
-All piping
-8" crank pulley w/spacer
-Procharger intercooler (standard version, not the duals)
-FMU
-3.8" pulley mounted on blower currently
-4.25" pulley (brand new)
-(2) 8-rib belts (one brand new)
-Tensioner
-Standoffs w/hardware
-Main mounting bracket
-Molded Procharger inlet tube (not the dryer hose)
-Large upgraded filter
-(2) bottles of Procharger oil
This was used on a stock LT1 making 8psi. The blower was never pushed.
I also have a set of 8 Trickflow 89044 injectors (44#) that was used with this setup.
$2700 for complete blower setup, $2850 including injectors.
-P1SC head unit
-All piping
-8" crank pulley w/spacer
-Procharger intercooler (standard version, not the duals)
-FMU
-3.8" pulley mounted on blower currently
-4.25" pulley (brand new)
-(2) 8-rib belts (one brand new)
-Tensioner
-Standoffs w/hardware
-Main mounting bracket
-Molded Procharger inlet tube (not the dryer hose)
-Large upgraded filter
-(2) bottles of Procharger oil
This was used on a stock LT1 making 8psi. The blower was never pushed.
I also have a set of 8 Trickflow 89044 injectors (44#) that was used with this setup.
$2700 for complete blower setup, $2850 including injectors.
#5
Re: Procharger P1SC for LT1 F-body
Good eye! Yes, that is a nitrous nozzle and it was being used as a 50 shot. The engine was never actually damaged with the spray.
The nozzle has been removed and that hole is now plugged.
The nozzle has been removed and that hole is now plugged.
Thread
Thread Starter
Forum
Replies
Last Post
Yby4n95Z
Parts For Sale
0
10-01-2004 04:27 PM