how to polish bdnik whls. again?
#1
how to polish bdnik whls. again?
I have budnik trilogy III's on my car, I keep them clean with alum. whl. clnr., but after 2 years of cleaning, there are swirl marks and they arent really, really shiney anymore. how can i get the shine back? should I use something like neverdull? or any other metal polish? thanks chris
------------------
1985 Iroc Z, (not together yet)
1986 Iroc Z, (also not together yet)350 ported camel hump heads,750, 700r4, 10.5 comp, solid cam .501I .510E, 3:73posi,girdle, Edel. torker II, shift kit, 3500 stal, dynomax LT. headers, 4 gen seats, man. strg., lt1 starter, alum. w/p, msd 6al, coil, dist., and wires. will have dual. exh.
exp high 12's-low 13's
1995 z28,SS Hood, Iroc style spoiler, tints and black outs, 700r4,2400 act. stall, 17" budnick trilogy III wheels, 275/40 ZR17, 160 stat, man. cooling fan sw., homemaid CAI,1LE elbow, hypertech airfoil, t.b.bypass,!cat, flowmaster, !maf screen, relocated batt., 1LE front l.c.a.s', poly trans and torq.arm bushings, MSD 6AL, custom program, p&p maf, accel coil, and under drive pulley
best1/4: 14.25 @96.13 (I suck at the track)
best60': 2.13
mods that i have, just not on car yet:
msd wires, edelbrock mid. headers, edelbrock rpm catback
------------------
1985 Iroc Z, (not together yet)
1986 Iroc Z, (also not together yet)350 ported camel hump heads,750, 700r4, 10.5 comp, solid cam .501I .510E, 3:73posi,girdle, Edel. torker II, shift kit, 3500 stal, dynomax LT. headers, 4 gen seats, man. strg., lt1 starter, alum. w/p, msd 6al, coil, dist., and wires. will have dual. exh.
exp high 12's-low 13's
1995 z28,SS Hood, Iroc style spoiler, tints and black outs, 700r4,2400 act. stall, 17" budnick trilogy III wheels, 275/40 ZR17, 160 stat, man. cooling fan sw., homemaid CAI,1LE elbow, hypertech airfoil, t.b.bypass,!cat, flowmaster, !maf screen, relocated batt., 1LE front l.c.a.s', poly trans and torq.arm bushings, MSD 6AL, custom program, p&p maf, accel coil, and under drive pulley
best1/4: 14.25 @96.13 (I suck at the track)
best60': 2.13
mods that i have, just not on car yet:
msd wires, edelbrock mid. headers, edelbrock rpm catback
#2
Quit using the spray on wheel cleaner, it is what is dulling the wheels, I have been telling everyone here for the last 2 or 3 years to stop using these spray on and hose off wheels cleaners as they contain acid that gradually dulls the finish, after you polish them only wash them with plain car wash and water.
If I where you, I would start with some Mothers Mag wheel polish which is a little rough and then finish with Wenol in the blue tube or Magic Mic Metal polish which is what I use on all my billet wheels (2 sets)
------------------
96 Black Impala SS
Authorized Zaino Showcar Polish Distributor
www.zainobros.com
Remember #3
If I where you, I would start with some Mothers Mag wheel polish which is a little rough and then finish with Wenol in the blue tube or Magic Mic Metal polish which is what I use on all my billet wheels (2 sets)
------------------
96 Black Impala SS
Authorized Zaino Showcar Polish Distributor
www.zainobros.com
Remember #3
#3
<font face="Verdana, Arial" size="2">Originally posted by KevinSS:
Quit using the spray on wheel cleaner, it is what is dulling the wheels, I have been telling everyone here for the last 2 or 3 years to stop using these spray on and hose off wheels cleaners as they contain acid that gradually dulls the finish, after you polish them only wash them with plain car wash and water.
If I where you, I would start with some Mothers Mag wheel polish which is a little rough and then finish with Wenol in the blue tube or Magic Mic Metal polish which is what I use on all my billet wheels (2 sets)
</font>
Quit using the spray on wheel cleaner, it is what is dulling the wheels, I have been telling everyone here for the last 2 or 3 years to stop using these spray on and hose off wheels cleaners as they contain acid that gradually dulls the finish, after you polish them only wash them with plain car wash and water.
If I where you, I would start with some Mothers Mag wheel polish which is a little rough and then finish with Wenol in the blue tube or Magic Mic Metal polish which is what I use on all my billet wheels (2 sets)
</font>
Thread
Thread Starter
Forum
Replies
Last Post
carguyshu
Parts For Sale
20
01-22-2017 11:19 AM
Catmaigne
Parts For Sale
0
07-14-2015 05:17 PM