Any ideas for cleaning Borla Stainless exhaust tips? I've tryed several cleaners and rims polishes to no avail. Will the Stainless steel cleaners that restaurants use work very well if i mask off the bumper?

 

i would like to know too,

i have Borla carbon fiber tips and the polished edges are getting dirty and unshiny,
is there anything good to make them shine again,
how can i make the carbon fiber shine too???
thanks,

 

Have you tried EagleOne's NevrDull wadding? Works great for polishing up tips or any metal surface really. Also, Blue Magic makes a metal polish that really cleans up tips.

Mike

 

Try an SOS pad and then go with a metal polish.

 

This is what I used when I had the Borla on the Z28... worked pretty well...

 

Bleach White tire cleaner and an SOS pad.

~John

 

I use Brasso and #0000 steel wool on my tips. Works great, and I just finish it off with some Eagle 1 polish. You can get the #0000 steel wool from Home Depot or someplace similar. A bag of it will last you forever, and it's almost as soft as cotton.

- Brent

 

I agree w/ John. I've used the bleach white and it works super. My Borla system has been on since '95. Tips look great after bleach white. Finished them off w/ brasso. Hope this helps!