I need any rear sway bar, a 32mm front sway bar, and a wonder bar for a 3rd gen. Post what you have.

 

I have the stock bars and endlinks/bushings from my '95 Z28.

 

I have the 19mm rear bar, 32 mm front bar, Poly D bushings, and poly endlinks (I need to make sure on the front endlink, definitly on the rear) for $120 plus shipping

Thanks
Evan

 

wonder bar? panhard rod? if so I have a factory panhard rod for 10 plus shipping

 

I have 1LE sway bars and poly bushings off of my 95 TA. 100+shipping.

 

32mm/19mm is the 1LE size
I'll match the $100, split the shipping, and I offered first
So There

 

It may be the same size, but 1LE are hollow and are made from better material to have the same strength as the heavy solid ones.

 

Ok, in the 3rd gen tech forum I was told I have a 16mm front and no rear sway bar. I looked under and the front looks about 32mm and the rear is 16mm. I was told 32 in the rear would make it too stiff. I want to get some bushings first and a wonder bar.

 

If the rear is 16 then the front is probably 28 or 29, that should be stock. Poly bushings will help, but if your going to do the work might as well do the bar too.

 

I decided to keep my rear, so I am either getting a 32mm sway bar or a wonder bar, whichever best offer comes up first.