w/ round park/fog lights (not Trans Am). I think '98-02 Firebird will work
Need also the styrofoam impact pad.
May need hatch too (low).
Located in Denver...
Thx!
Rick

 

i have one from a 99 that had two small tears in it that have been fixed the right way with fusor and mesh and then primed just needs sanded and painted looking to get $100 for it and i may have the foam backing for it too thati will through in for free but on the foam peice where the clips go to hold it on the clips were pulled through and now the holes are too big but im sure it could be fixed or atached another way and these are all gm oem parts

but im not sure how i would ship that parts since im located in pittsburgh pa

ken

 

Hi Ken -
Thx for the reply; I'm interested....checking on shipping.

Called UPS today; interesting info (for anybody).....
Their formula for max package size is: Length (in.) + 2 * width (in.) + 2 * height (in.) has to be less than 165, to be shipped.

Depending on package, oversize charge is $40 adder (didn't explain that one clearly). Shipping w/o box costs $6 extra.

I shipped a couple of fenders in home-made "L"-shaped boxes (2-sided) and they arrived fine; shipping was reasonable (like $30). I will measure my old front cover, or if you can, and estimate LxWxH dimensions, that will tell me if UPS can take it.

My email is rick.somerville@minarikcorp.com.

 

I have one off a 02 firebird It's red in color great looking could pass as new I also have a hatch same color perfect shape Pm if interested

 

Thanks - the newer one sounds better....I'm restoring a salvage '02 Formula w/ only 7k miles; would rather not use a repaired if I don't have to (Thanks though Ken).
I'll get some measurements and contact Fedex freight for a quote - I was told today that they can do larger-than-UPS, smaller-than-truckload. Whereabouts are you located?

And would you be able to sortof package them at all? I don't know what's needed, but imagine some cardboard w/ padding anyway.

Thanks,
Rick

 

http://web.camaross.com/forums/showt...70#post3671070

Be careful buying anything from philcam01

 

Thanks - we exchanged a few emails, and then he just disappeared. So I bought from another source -- appreciate the heads-up.

btw - Cleveland pick a part is a great place to buy parts - prices are good, their computer system is accurate, they built an 'enclosed' pallet and sent me a hatch, bumper, etc. and all arrived fine. They have a big store on ebay too.

I'd strongly recommend ---

-Rick