Ok, so heres the deal...i wanna try to realize some plans i have formulating in my relatively neanderthal skull...

my 84 C4 is still getting the 427BBC - this is for another side project.

i am looking for a GOOD BARE 350cid block...block only...MUST have main caps.

It does not matter wether or not it is a 2 or 4 bolt block - as long as you have all the caps...

it does not matter if it is a roller or non-roller block - i plan to use a solid cam and lifters...

i DO however have a preference for 2pc rear main seal. the crank i have in mind is made for a 2pc block.

It does not matter if it is standard bore or not. my plans are to fill it and go min .060 over anyways

the mains must be in good shape too...no block damage or anything crazy like that - no cracked bores, excessive anything...

just looking for a good clean 350 block with caps for a big cube project...

you may contact me here by PM or email at fubar569@verizon.net. i'm also usually on AIM and my screenname is sharkbodyvette

I'd prefer something close to home, but will travel a bit depending on the deal. I'm located in Bradford, PA for reference

 

got one...thanks for the pm's and email!