Ok I'm lookin for a 3rd gen body. A Roller preferably. Something that wasnt' wrecked and doesn't have holes. surface is rust is ok and the floors must be good. LEt me know what everyones got

 

I've got an 87 GTA Hard Top with digital dash, crosslace 16" wheels, tan interior, maroon exterior, 9bolt with 3.45 gears, subframe connectors and other misc bolt on susp parts.
Body is nice and straight, paint is faded.
Car is located in Virginia. $1350 for it.

 

How about an 85 RS. Blue no rust and body is in great shape. It is a 2.8 that runs but knocks a little. $750 in South Carolina

 

I have an '87 GTA that I would pull the engine out of since the trans is bad. It has no rust anywhere. The interior is great except for the drivers seat. Color is black / black.
Cost without engine - $2100

 

hey WHTLT1,

i've been trying to sell my 1991 z28 for some time now either complete or as a roller. the car is loaded with performance parts. i'm leaving work now, but if you email me i can send you some pics and a mods list tomorrow.

1991 z28 hrd top, met. red
383 with vortech blower = 730hp & 700 trq.
700r4 tranny 3600 stall
9-inch ford
6pt cage
baer brakes
all kinds of suspension goodies

dan_barrie@yamaha-motor.com

 

1990 Trans Am GTA. Black. 10-bolt w/ 3.08's. Tan interior. Hardtop. 16" wheels. 140mph dash. $500 in North Carolina. More pics can be seen at the website in my sig.

-Corey

 

i got a 85 z28 auto, ttop, fresh paint, many new parts and some aftermarket, 160k, needs a good motor, she runs tho

 

how much

 

We have a 1982 Camaro T-Top car for sale in Loudon Tennessee for $300 bucks.

please email me of you are interested. I have some pictures somewhere, I'm looking for them. Surface rust only, NO ENGINE, Automatic Tranny comes with it..

Not wrecked. Just come and pick it up.

Brian.larose@hp.com

http://www.bowtieracing.org

 

well it was a sr project for high school , so all in all i got about 4000 into it, i would say make an offer, i can get pics tomm if u want, or you can come look at it.. has flowmaster exhuast, petronix coil, moroso wires, and a goodmark 3" steel cowl hood lmk

 

I've posted a picture of that camaro on my racing website.

You can view it by going to http://www.bowtieracing.org and looking at the SECOND camaro (the beige one).. NOT the #18 SCCA ESP racing camaro, it's NOT for sale...

Anyway, contact me if interested. We can deliver if you HAVE to have that.. I LOVE Chicago... (but it won't be as cheap).

Brian

 

SO? What do you think? $300 is cheap for a decent 3rd gen. Please let me know if you are still intereted..

Brian

http://www.bowtieracing.org

 

I got one. Blue IROC-Z...'87 or '88 I believe. No motor or transmission in the car. Body is a pretty good shape. Looking to get $1500 for it. I'm in So. Illinois, so I'm sure we can arrange something to drop it off/pick it up. If you want some pics, drop me an e-mail.

 

1986 IROC-Z Camaro, red t-top car, body in very good shape, no rust, southern car, 160k miles on body...all suspension components replaced. No drivetrain, prepped for manual trans. Mods:
rollbar
4thgen rearend
12" front brakes
hedman longtubes
car is still TPI with harness
walbro 255 lph pump
borla catback exhaust
spohn torque arm, T-56 crossmember-d/s loop
LCA's, panhard, SFC's and STB
autometer guages
new ABS red headliner, interior is CLEAN
all polyurethane bushings
4thgen dash (not installed)
new GM relays, sensors, switches, etc...
sure there's more to list that I'm not thinking of

needs paint and drivetrain. perfect for LT1 drivetrain. Stock springs chopped 1/2 coil up front. All these mods have to go with the car since they're designed for it. Would be happy with $2000. It's a roller. Would keep but I want a vette more...if it doesn't sell I'll just keep it. In the army so no time to finish anytime soon. If interested email me