WTB 12-bolt for 95 F-body
02-03-2014, 08:05 PM
#2
Registered User
Join Date: Jul 2001
Location: California
Posts: 310
Re: WTB 12-bolt for 95 F-body
Did you ever find a 12 bolt? I have a 95 Formula car I put a Moser 12 bolt in a long while back. Maybe put 2500 miles on it just breaking in the 383 Stroker and all the other stuff done to the car. Never raced. I had to pill long tube headers as well as some fuel rail work and the car fell to the back burner. It was jerry rigged by a potential buyer who backed out. He chopped a access hole to the fuel tak to change a pump. A 12 year old could of done better. Hole was too small so he started folding the sheet metal. Anyhow, Car is sitting in my drive way. I like to get $5,000 for the whole car.
BMR suspension, K member upper and lower A arms extreme duty torqye arm, boxed sub frame connectors panhard rod ect. QA1 adj shocks. Corvette front brake calipers and disks and adapter brackets. Racetronix fuel system kit installed but pump was changed by a guy who put in something else. ( If I were to build the car I would go with a new pump. ) CSI water pump, race radiator. Hooker LTs, Mufflex Y pipe. AFR 210 or 211 LT4 Heads 383 Stroker built by NeuTec motorsports back in the day.
If you ran a search for my post you could see more about car. Rear end is 3.42's with heavy duty posi. 1LE brake brackets welded by Moser. I may be willing to sell just te rear end. Located in OR 97603
BMR suspension, K member upper and lower A arms extreme duty torqye arm, boxed sub frame connectors panhard rod ect. QA1 adj shocks. Corvette front brake calipers and disks and adapter brackets. Racetronix fuel system kit installed but pump was changed by a guy who put in something else. ( If I were to build the car I would go with a new pump. ) CSI water pump, race radiator. Hooker LTs, Mufflex Y pipe. AFR 210 or 211 LT4 Heads 383 Stroker built by NeuTec motorsports back in the day.
If you ran a search for my post you could see more about car. Rear end is 3.42's with heavy duty posi. 1LE brake brackets welded by Moser. I may be willing to sell just te rear end. Located in OR 97603
02-14-2014, 05:41 PM
#3
Registered User
Thread Starter
Join Date: Feb 2008
Location: Robinson Township, PA
Posts: 292
Re: WTB 12-bolt for 95 F-body
Did you ever find a 12 bolt? I have a 95 Formula car I put a Moser 12 bolt in a long while back. Maybe put 2500 miles on it just breaking in the 383 Stroker and all the other stuff done to the car. Never raced. I had to pill long tube headers as well as some fuel rail work and the car fell to the back burner. It was jerry rigged by a potential buyer who backed out. He chopped a access hole to the fuel tak to change a pump. A 12 year old could of done better. Hole was too small so he started folding the sheet metal. Anyhow, Car is sitting in my drive way. I like to get $5,000 for the whole car.
BMR suspension, K member upper and lower A arms extreme duty torqye arm, boxed sub frame connectors panhard rod ect. QA1 adj shocks. Corvette front brake calipers and disks and adapter brackets. Racetronix fuel system kit installed but pump was changed by a guy who put in something else. ( If I were to build the car I would go with a new pump. ) CSI water pump, race radiator. Hooker LTs, Mufflex Y pipe. AFR 210 or 211 LT4 Heads 383 Stroker built by NeuTec motorsports back in the day.
If you ran a search for my post you could see more about car. Rear end is 3.42's with heavy duty posi. 1LE brake brackets welded by Moser. I may be willing to sell just te rear end. Located in OR 97603
BMR suspension, K member upper and lower A arms extreme duty torqye arm, boxed sub frame connectors panhard rod ect. QA1 adj shocks. Corvette front brake calipers and disks and adapter brackets. Racetronix fuel system kit installed but pump was changed by a guy who put in something else. ( If I were to build the car I would go with a new pump. ) CSI water pump, race radiator. Hooker LTs, Mufflex Y pipe. AFR 210 or 211 LT4 Heads 383 Stroker built by NeuTec motorsports back in the day.
If you ran a search for my post you could see more about car. Rear end is 3.42's with heavy duty posi. 1LE brake brackets welded by Moser. I may be willing to sell just te rear end. Located in OR 97603
Thread
Thread Starter
Forum
Replies
Last Post