Just like it says.

I'm looking for an LT1 obd2 style timing cover. Would prefer sensor included but will take one w/o.

Getting ready to do an LT4 hotcam and am looking for valve springs that will handle it better than stock.

Also looking for an adjustable timing chain set.

A friend of mine is looking for some stock F-body LT1 heads. 94-95 prefered, but will take anything. Would prefer if they were complete but will concider as well.

Thanks

I do have some parts laying around, so if you have anything and are looking for something in particular let me know.

 

Hi,
I have some AFR double coil with flat dampner springs that will handle up to a .600 lift cam, which would work great for your hotcam. They have only been used about 3k. They are very similiar in spec to comp cams 986-16 springs for comparision. I would like to get 50 shipped. Let me know what you think,
Dan

 

Do those springs have the same O.D. or do the heads have to be machined to fit them?

Anyone else??

 

Lets add an aluminum DS to this and send it ttt

 

TTT again, come on guys, i know someone has some of this stuff laying around.

My friend is also looking for a set of Trick Flow or comparable heads for his pre 86 block.

 

Are you looking for a 95 or 96-97 timing cover? I think they're the same except for the provision for the crank position sensor.

 

I'm looking for the 96-97 with the sensor.

 

i have a set of 93 lt1 heads for $200 perfect condition they had a 3 angle valve job 5000 miles ago only thing missing is the roller rockers

 

So they have all the valves and springs and are assembled? How much shipped to 95843? And he'll probably take them.

 

everything but the rollerrockers are there shipping will be about $45

 

Still looking for all of these things. Also, add some 1.6 ratio RRs to the list

 

I have a set of Comp Cams 941 valve springs with a set of titanium retainers to match. They were only used 300 miles. Pulled them to put springs to handle a solid roller. The 941's will handle up to a .560 lift witch would be great for the hot cam. Also they will drop right in with no machining of the heads. I'm asking $150 for them + shipping. LMK FWIW I paid $145 for the springs new and $200 for the retainers.

Joe