TH400 parts needed....
Thread Starter
Registered User
Joined: Apr 1999
Posts: 2,784
From: Rochester Hills, MI
TH400 parts needed....
I am looking for the following:
CSI Transhield
B&M Race Transcooler
B&M SFI Approved Flexplate (153 tooth)
Driveshaft to fit a TH400 to a Moser 9-in.....
CSI Transhield
B&M Race Transcooler
B&M SFI Approved Flexplate (153 tooth)
Driveshaft to fit a TH400 to a Moser 9-in.....
Registered User
Joined: Feb 2001
Posts: 1,450
From: Belleville, IL
Gonna help ya out here man. 
CSI Super Shield:
http://www.racingjunk.com/vc/243082/classifiedad.html
That's about the best deal you're gonna get unless you get it new.
Mine was right at $300.
CSI Super Shield:
http://www.racingjunk.com/vc/243082/classifiedad.html
That's about the best deal you're gonna get unless you get it new.
Mine was right at $300.
Thread Starter
Registered User
Joined: Apr 1999
Posts: 2,784
From: Rochester Hills, MI
Originally posted by mongse_1
Gonna help ya out here man.
CSI Super Shield:
http://www.racingjunk.com/vc/243082/classifiedad.html
That's about the best deal you're gonna get unless you get it new. Mine was right at $300.
Gonna help ya out here man.
CSI Super Shield:
http://www.racingjunk.com/vc/243082/classifiedad.html
That's about the best deal you're gonna get unless you get it new.
Mine was right at $300.
What kind of tranny cooler are you running with your setup?
Registered User
Joined: Feb 2001
Posts: 1,450
From: Belleville, IL
Ahh, I thought they were the same..my bad.
This is the cooler I think I'm using...
http://store.summitracing.com/partde...rt=BMM%2D70273
I know the dimensions are pretty similar. I mounted mine to the tubular k-member and manual rack. It's still higher than the oil pan, so if it does get damaged, it'll be the least of my concerns.
This is the cooler I think I'm using...
http://store.summitracing.com/partde...rt=BMM%2D70273
I know the dimensions are pretty similar. I mounted mine to the tubular k-member and manual rack. It's still higher than the oil pan, so if it does get damaged, it'll be the least of my concerns.
Thread
Thread Starter
Forum
Replies
Last Post