Upate:

still need heater hoses, ac lines, coolant hoses, headers and y-pipe, catback, maf sensor, intake elbow (no vent hole for opti), front springs, shocks if they aren't that old, oil pan (94 or 95) preferrably w/ low oil sensor.

Keep em' coming fellas, You guys on this forum have been awesome! I almost have everything I need for my lt1 swap and I owe it all to the members of this forum, much thanks to everyone who has helped with parts and info.

Noah

 

I can help you on a pan and possibly those ac lines...

 

Another update/bump:

I have a few things pending, water pump, intake elbow and maf. I bought pacesetter lts and y pipe and will most likely be purchasing magnaflow within the next day or so.
So I'm down to a few things: coolant and heater hoses, springs, shocks, stock or aftermarket front sway bar, and I also need any other accesory brackets excluding the main accesory bracket (alternator rear bracket- just the little arm brace on the back, and also ac and ps rear brackets if they have them), good posi unit for 3:23's, I'm not sure if the crank pulley and harmonic balancer on the 94 vette motor I have are the same as f-body, so if someone knows that they are different, I'll need those too. Also need tensioner pulley and if anyone knows where to get an egr block off plate or has one for sale, let me know.

No longer need tensioner or alternator bracket/ found out I do need crank pulley/balancer
thanks again

 

I have the tensioner and the brace for the rear of the alternator. Maybe the a/c rear brace too. Bill

 

Still need crank pulley/harmonic balancer, all heater/coolant hoses (including the coolant line that bolts to the back of the block in two places and runs between the intake manifold and valve cover up to the radiator), good deal on new or newer 3000 stall conv. I also need ignition coil, ignition control module, and all related mounting for these- including bolts. I was working on my motor today and realized that the corvette setup is on the wrong side and will be in the way of the camaro accesory bracket.

pending: front sway bar, springs, rear ac bracket, posi unit

thanks

 

still need fuel rails and etc

 

Nope, I got those- thanks.

 

I have a stock crank pulley, ignition coil (you need 92-95 2 plug, or 96/97 1 plug?), ignition module. I don't have the bolts for that stuff though. I have a ton of parts here. You need anything else?

 

I ended up getting that stuff, thanks anyhow. All I need now are all heating and coolant hoses/lines (exceptional condition only), oil pressure sensor (top rear of engine block), new or newer shocks, posi unit (I've got stock 3:23 gears), new or newer 3000 stall converter-preferably a yank, vig, or fuddle, and I think thats about it.
thanks again to those who have contacted me about parts and also given me the information I've needed for this swap.

 

Ok, cool. I have the sensor.