Need 10bolt, stock torque arm, any driveshaft
Thread Starter
Registered User
Joined: Oct 1999
Posts: 1,490
From: Tampa Florida
Need 10bolt, stock torque arm, any driveshaft
Posting it for a friend cuz he's working on the car right now..
For an LT1 but all these parts will fit.
Need a 10bolt rear end or Parts off a 10bolt (still accessing damage)
Need a stock Torque arm
Need any driveshaft.
Also if u know a good place to find these for cheap im all ears.
Thanks fellas.
For an LT1 but all these parts will fit.
Need a 10bolt rear end or Parts off a 10bolt (still accessing damage)
Need a stock Torque arm
Need any driveshaft.
Also if u know a good place to find these for cheap im all ears.
Thanks fellas.
Registered User
Joined: Nov 1999
Posts: 487
From: East Petersburg, Pa, USA
I've got a stock torque arm. $50 plus shipping. mlgracing@comcast.net
Registered User
Joined: Sep 2003
Posts: 236
From: Detroit area
If thirdgen parts will work(which they will as far as I know) I have a stock sttel driveshaft, and a stock torque arm. Email me at DunawayD@twmi.rr.com if ya want them
Registered User
Joined: May 2003
Posts: 142
From: Timberlake,Ohio
Registered User
Joined: Aug 2003
Posts: 1,669
From: Houston, Tx
i ahev a driveshaft for ya off my 95 Z28...offer me a price and email me at randysatterfield@hotmail.com
randy
randy
Registered User
Joined: Nov 2001
Posts: 306
From: Richmond Hill, GA. United States
I have the stock torque arm and the rearend from my 99TA. The rearend is a 3 channel ABS setup with 3:23 gears. Nothing is wrong with it, I just upgraded with a new rearend. The rearend is complete from caliper bracket to caliper bracket. You can have it all for $250 if you pick up or I can meet you close to I-10 and 301 for $50 extra. That's about half way between Tampa and Savannah, GA. I also take PAYPAL, you can email me at curt96ws6@hotmail.com
Thanks,
Curt
Thanks,
Curt
Registered User
Joined: Sep 2003
Posts: 1,917
From: Las Vegas
i have stock torque arm, lower control arms, pan hard rod, and i will sell a complete 10 bolt with 4.10 gears and an eaton posi.
Ratoka1@comcast.net
Ratoka1@comcast.net
Registered User
Joined: Jun 2002
Posts: 463
From: P'COLA, FL
Registered User
Joined: Feb 2001
Posts: 1,081
From: Charleston, WV, U.S.
Have a stock driveshaft from 94 model with only 40K miles. Was thought to be wobbly and causing a vibration but it wasn't the culprit....turns out it is something with my axles more than likely because I still hear the vibration with my new Denny's HD shaft. The old driveshaft has been balance tested and found to be perfect. It is undercoated to be quieter too.
Let me know if you're interested .....I'll let it go pretty cheap as it's just taking up space.
Let me know if you're interested .....I'll let it go pretty cheap as it's just taking up space.
Thread
Thread Starter
Forum
Replies
Last Post