Alternator/Bracket/Bolt

Old May 7, 2009 | 01:42 PM
  #1  
MG231's Avatar
Thread Starter
Registered User
 
Joined: Feb 2004
Posts: 38
From: Tallahassee, FL
Alternator/Bracket/Bolt

I need the proper bolt that fits the drv side of the alternator(where it threads through the alternator and the bracket.

I also need the pass side bracket/support brace for it. Just replaced the main acc bracket and realized I don't have this. All I have is the main one that bolts to the intake and the drv side of the alternator(left ear and the rear to the intake).

I guess this was lost at some point on the car. This is the second time I've had the alternator off and I just realized it is missing this piece and the bolt is wrong. Not threaded far enough or too short or something. Tried to run it through and cracked the ear off the alternator. Anyway, I can send pics if you think you have what I need but aren't sure if it's what I'm talking about. Tryin to just get it back together today to move it to the house. Putting the car up for sale on here shortly.
Old May 8, 2009 | 05:49 PM
  #2  
MG231's Avatar
Thread Starter
Registered User
 
Joined: Feb 2004
Posts: 38
From: Tallahassee, FL
Okay...this should be more clear. Thanks for the response guys.

http://shbox.com/ci/ci178.jpg

Looking at this pic, I need the bolt that fits through the upper yellow circle. I also need the one below the circle for the power wire. The brace that mounts on the pass side of the alternator(closer to the wheel, not the one that is on the engine side). Thanks
Old May 11, 2009 | 08:47 PM
  #3  
M2004SCMC's Avatar
Registered User
 
Joined: Sep 2004
Posts: 38
From: Sanford
I should have both of these from my removed alternator. I'll look for them tomorrow evening and let you know.

Mike


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:38 AM.