For a LT1

In need of a 306 cam, a cam close to it like an LE2.

For Injectors, I would prefer 30 or 32lb injectors but 36's will be fine. Please let me know the part numbers on them.

Pictures, if any, to ammoniableach@yahoo.com
Thanks

-Russ

 

I have a 306 Cam that's currently out of my car. Just had it polished (had been sitting for a while) for a re-install but I'm going another route. This one is a custom grind with the 306 specs but an ever so slightly gentler ramp to prevent slamming the valve closed so it's easier on the valve train. The cam has only about 1000 street only miles on it tops. I believe it cost me just under $400 to have made (pretty sure it's billet). I'd take $200 for it. Would prefer pickup, I'm in CA, it's at my machine shop in Mountainview but I can ship if need be.

 

PM sent

 

have an le2.2 cam. asking 250+shipping