I'm hoping someone has a 4L60e torn apart and sitting in a box in the corner of their garage somewhere.... Or maybe you know someone that does?

I need a couple parts to add a VSS to a Jerico Trans:

40 tooth tone ring - It's pressed onto the outpshaft of the trans. Probably pretty tough to get off, so if you want to send me the whole shaft that's cool.

Vehicle Speed Sensor - It's located in the passenger side of the tail housing.

These parts can be found in 1993 and newer 2wd trucks and 1994 and newer rear drive cars.

This is a long shot but I'm also looking for a DRAC (digital ratio adapter controller) from a 89-94 S10, Astro Vans, and 90-95 full-size trucks. The VSS is wired into this and it conditions and applies a ratio to the signal that goes to the speedo and ECM.


Thanks, Stan

 

I have a 4l60e torn apart sitting in a box in my shop. I will have to dig through it to see if that part is there. I know I don't have a vss, that went on the new trans along with the tail housing.

 

I've got a complete 4l60e thats torn apart....I'll see if I've got those parts.