Vortech V1 S Trim for LT1 For Sale
Vortech V1 S Trim for LT1 For Sale
Hey everyone,
I'm selling the Vortech S trim off my car. Asking $1600 Shipped.
You get...
A V1 S trim head unit
The brackets
Oil Lines
An FMU
A T Rex Fuel Pump
A MSD 6BTM Box
Crank and Blower pulleys for 7 PSI on a stock LT1
A Vortech elbow and the blower elbow with the bypass valve, the Vortech elbow has holes drilled for an Alky kit, but they are easily patched, also, both tubes have been cut to place the MAF between the blower and the throttlebody
I'm not including my hard intake or filter because it will be reused on the T trim I just bought.
If interested, please e-mail me. ChrisGainey@bellsouth.net
I'm selling the Vortech S trim off my car. Asking $1600 Shipped.
You get...
A V1 S trim head unit
The brackets
Oil Lines
An FMU
A T Rex Fuel Pump
A MSD 6BTM Box
Crank and Blower pulleys for 7 PSI on a stock LT1
A Vortech elbow and the blower elbow with the bypass valve, the Vortech elbow has holes drilled for an Alky kit, but they are easily patched, also, both tubes have been cut to place the MAF between the blower and the throttlebody
I'm not including my hard intake or filter because it will be reused on the T trim I just bought.
If interested, please e-mail me. ChrisGainey@bellsouth.net
Last edited by 97WS6SCharged; Mar 5, 2005 at 05:55 AM.
Re: Vortech V1 S Trim for LT1 For Sale
My hard pipe was fabricated. Vortech doesn't sell the hard intakes, just the dryer hose (which tends to crack or collapse as it ages). I believe I payed $125 for the pipe, and $25 for the filter.
Re: Vortech V1 S Trim for LT1 For Sale
An intake pipe and an air filter. I had mine made out of 3.5" aluminum mandrel bends and I used a K&N cone filter. Cost me around $150 for the whole thing. Also, a fitting for the oil pan for the oil return line. Everything else that's needed will be included.


