Vortech S-trim kit (LT1 Camaro/Firebird)
#1
Vortech S-trim kit (LT1 Camaro/Firebird)
Vortech supercharger kit for LT1 Camaro/Firebird's. This is a complete setup designed for cars not needing the "band-aid" upgrades that originally come with the kit (inline pump, FMU). You really need to have a 255lph intank pump with this setup. Additionally, I did not use the FMU on the car. No FMU is included. It's far better to run a good set of larger injectors and to tune accordingly.
Includes:
-Vortech V-2 S-trim headunit (14k miles)
-6.66" and 6" crank pulleys
-3.33" blower pulleys
-headunit mounting brackets w/hardware
-tensioner
-2 belt (one for 6" crank pulley, one for 6.66")
-custom 3.5" solid/welded intake tube (gained 2psi over the stock dryerhose junk)
-Huge 4" K&N conical filter (65% more surface area than stock filter)
-all inlet tubing and elbows
-Vortech metal elbow to TB
-all clamps and rubber couplings
-oil line to supercharger
-oil drain line from blower to oil pan
-stock Vortech blow off valve w/vacuum lines and fittings
The blower is currently on the car and running perfectly. It makes 10psi with the current pulley combination (6.66/3.33) at 6100rpms (351ci, stock heads, small cam). I am selling this kit because I'll be stepping up to a bigger blower. The kit will be removed from the vehicle when payment is received.
Pictures will be posted shortly.
$1800 shipped
Thanks, Jason
Includes:
-Vortech V-2 S-trim headunit (14k miles)
-6.66" and 6" crank pulleys
-3.33" blower pulleys
-headunit mounting brackets w/hardware
-tensioner
-2 belt (one for 6" crank pulley, one for 6.66")
-custom 3.5" solid/welded intake tube (gained 2psi over the stock dryerhose junk)
-Huge 4" K&N conical filter (65% more surface area than stock filter)
-all inlet tubing and elbows
-Vortech metal elbow to TB
-all clamps and rubber couplings
-oil line to supercharger
-oil drain line from blower to oil pan
-stock Vortech blow off valve w/vacuum lines and fittings
The blower is currently on the car and running perfectly. It makes 10psi with the current pulley combination (6.66/3.33) at 6100rpms (351ci, stock heads, small cam). I am selling this kit because I'll be stepping up to a bigger blower. The kit will be removed from the vehicle when payment is received.
Pictures will be posted shortly.
$1800 shipped
Thanks, Jason
Thread
Thread Starter
Forum
Replies
Last Post
PFYC
Supporting Vendor Group Purchases and Sales
0
01-23-2015 01:13 PM