Well time to clean out the garage and get some money for some other parts...Everything I can take pictures of and send your way via email- just no tire kickers please....All prices are plus shipping- Do your best estimate on shipping- I only charge actual shipping- but I don't feel like doing 300 shipping estimates...Pick-up is ok for the bigger items...

All used parts were used on a 94 LT1 Z28...

Aeromotive A1000 Fuel Pump- -10AN in and out, brand new never mounted or fittings threaded in either end. Still has oil from Aeromotive on it. Just been sitting around in its box, time for it to go. Box doesn't look perfect but fuel pump is. I would say $250 is fair...

Edelbrock Mid-length headers y-pipe for 93-95 LT1. Used for about 2 years...the EGR ports have been welded closed...Headers are in typical used header shape- the y-pipe has a wide-band bung welded in the driver side, perfect if you have one or are going to get your car tuned on the dyno. Thinking around $200 for them...

8 Ford 42lb injectors- Have maybe 500 miles on them. Going to a smaller pulley, bigger motor and need bigger injectors. $200

8 Venom 96 lb 1000 cc injectors- they are high imped so will still work with stock PCM with programming obviously...I didn't go as big with the motor project as I was thinking so don't need them. They are quite a few years old, but still brand new never mounted or anything. They come with a flow-sheet as well. $350

Alum Underdrive Pulley- unsure what brandname- it came on the car, works fine, just not with a blower. $25

1LE Intake Elbow- good condition, no cracks- $30

Salad Shooter center caps- 4, all in fair shape- the chrome isn't perfect, but make a great set of spares or to replace your crappy ones. Make me an offer on all 4, they are a set.

SLP Y-pipe for factory manifolds for 93-95 cars. Brand new never mounted. $200 new, sell for $50.

Lakewood LCA's- they came black powdercoat, I painted them red, then a can of black paint exploded near them so they are kinda black again..lol...prol with some paint thinner you could get the powdercoat back or paint them your own color. Come with poly bushings- these have never been installed- $70

17" SLP Chrome WS6 Wheels- these are true SLP wheels, not knock-offs. 17x9's with 275's Goodyear's on 2 of them. Tires have maybe 20-25% tread life. They are used with usual light scratches in the clear coat from cleaning over time. They have SLP center caps. The one wheel somehow must have a slight bend in it. You can see the tire move to the side maybe quarter of an inch. It still balances perfectly and you can't feel it driving down the road. Just being honest- From what I hear you could get it fixed for less than $100 or just buy one knock-off and have a nice set of wheels. $375

I also have a GM CME Valance- the good one, not the two-piece version, and a GM Dual tip that matches it. The valance is Pewter Silver. Neither piece has been installed, just not sure if I want to sell it. Guess what it comes down to is if the right price is offered I'll get rid of it. We both know what they are worth so don't waste my time with $100 offers....

Cloyes Dual Roller Timing Set for a SBC. Brand new, won't work on a LT1 unless you have deleted the Opti as the cam gear doesn't have the keyway for the opti drive. $50

I have some other things avail just have to check...a 383 kit, spare LT1 block..plus some other things I'll have to dig up...

Either Reply, PM or send me an email at bigblkpjcrusher@yahoo.com...I have training this weekend till sunday night so please be patient. I will answer them in the order they are received and as always everything is first come first serve...Thanks

 

I would like to see a pic of the headers, interested. Also, did you have any installation issues? Do you also have o2 extensions? Thanks.

 

I'll take the 1LE elbow if you still have it.

-Dustin-

 

trying to reply from my phone so hopefully this turns out...lol

Adam- the headers went in easier after I chopped off the egr stuff..I would get some either locking header bolts or at the very least 1'' bolts..The only issue with them is they loosen up every once and a while. my car made great power with them before i went to long tubes. I forgot to add that there is a gutted cat on the end of the y-pipe still welded on that I'll throw in with them..

Dustin- elbow is yours..when I get to a real computer Sunday I will send you paypal info and such...

 

A couple PM's send...TTT after the weekend...parts gotta go and prices aren't set in stone....

 

PM sent

 

where are you located

 

I am quite new to this board but I am currently rebuilding my lt1 and I am looking for some headers. Yours sound like a pretty good deal, where ru located?

 

Interested in pics of the wheels. Can you email some over to me?

 

My router went down at home so I cant upload from home but I should be able to send from work. If you want pictures of things either post your email or send it to me via private message.

Those who asked for pics they will be sent tomorrow..sorry for the delay

 

I want the 42# injectors I will be on travel for my job until next Wedensday or Thursday and I can get them then.

 

Located in Olean NY, about an hour south of Buffalo...

Everything is still for sale...

 

TTT one last time...make some offers this stuff is going on ebay soon...

 

Fuel pump still 4 sale????

 

I'll take the fuel pump and 42#s if still available...903 271 5883