turbo-383 94 lt1 part out

Thread Tools
 
Search this Thread
 
Old Nov 28, 2006 | 09:07 PM
  #1  
stroked94T/A's Avatar
Thread Starter
Registered User
 
Joined: Sep 2001
Posts: 33
From: Palmdale,California,U.S.A.
turbo-383 94 lt1 part out

---STS turbo kit with 67-1 upgraded turbo capable of producing 740 flywheel hp everything including 13lb and 7lb waste gate springs and 0-5lb adjustable boost controller-----make offer
---AFR 190cc LT1 heads full race port and polish 2.02 int 1.60 ex. The exhaust valves are Manley extreme temp exhaust valves for supercharger/turbocharger applications to prevent softening of the exhaust valve at extreme temps. These heads made 550 rearwheel hp with a 383 and 11psi of boost from a 67-1 sts turbo w/ no intercooler
---make offer
---JE pistons part#170817 Extreme duty 3.75" stroke, 6.0" rod, -28 degree inverted dome 9.0-1 compression 300obo
---6.0" Eagle H-beam rods w/ L-19 bolts esp-6000B3DL19 $300obo
---Eagle 4340 forged crankshaft 3.75" stroke internal balance 1-piece rear main seal $400obo
complete rotating assembly balanced in shortblock $1700obo
---Comp Cams lifters $150obo
---ported LT1 intake $175obo
---BBK 58mm throttle body(small chip in it however sealed fine with 18lbs of turbo boost) $200obo
---Comp cams custom turbo cam .544/.544 230/230 115 ls $200obo
---LT4 hot cam $100obo
---Granetelli mass air meter GRN-350111 $250obo
---Meziere electric water pump and pump housing $200obo
--- 2 92-92 opti spark $250 eachobo
---msd blaster coil $35
--- accel 300+ ignition $175obo
---eaton posi FTN-19599-010 $350obo
---T-56 transmission everything perfect except reverse syncroze you have to hold the shifter in reverse or it pops out) $700 obo
---Comp Cams pro magnum 1.6 ratio rockers $230obo
---Canton 7qt oil pan w/ pickup and drive shaft $300obo
---3 quart oil accumulator (brand new in box w/ cable to turn on and off from inside car) $200obo
---60 lb siemen deka fuel injectors $400obo
---edlebrock 1 5/8 headers not coated edl-68943 $200obo
---Aeromotive A1000 fuel pump $200obo
---Aeromotive 10 micron fuel filter $50
---granetelli 255lph fuel pump grn 6M722-2 $75
---G2 4-point roll bar w/ harness bar G2-4PT-LB-B $3000obo
---polished aluminum ZR-1 wheels 17x9 front w/ 2754017 drag radials front and 17x11 rear w/ 3153517 drag radials 75% tread life remaining $700 obo
Old Nov 28, 2006 | 09:28 PM
  #2  
jerminator96's Avatar
Registered User
 
Joined: Nov 2004
Posts: 1,374
From: Raleigh, NC
How many miles on the T56?

And there is absolutely nothing else wrong with it except reverse? No hard gears or anything?

Thanks,

Jeremy
Old Nov 28, 2006 | 09:41 PM
  #3  
stroked94T/A's Avatar
Thread Starter
Registered User
 
Joined: Sep 2001
Posts: 33
From: Palmdale,California,U.S.A.
thats it. about 100000
Old Nov 28, 2006 | 10:02 PM
  #4  
JodyJ's Avatar
Registered User
 
Joined: Aug 2001
Posts: 644
From: Orange County, CA
Sent you a pm
Old Nov 29, 2006 | 04:19 AM
  #5  
blown383's Avatar
Registered User
 
Joined: Aug 1998
Posts: 1,384
From: Los Angeles, CA
The 3 quart oil accumulator is that the accusump?

-B
Old Nov 29, 2006 | 05:35 AM
  #6  
snakeatinZ's Avatar
Registered User
 
Joined: Jun 2001
Posts: 1,456
From: WaTaUgA, Tx
Not many miles are on the LT4 hot cam?
Steve
Old Nov 29, 2006 | 03:31 PM
  #7  
stroked94T/A's Avatar
Thread Starter
Registered User
 
Joined: Sep 2001
Posts: 33
From: Palmdale,California,U.S.A.
yes it is an accusump and the hot cam has about 30000
Old Nov 30, 2006 | 08:42 AM
  #8  
camarolt4ss's Avatar
Registered User
 
Joined: Feb 2006
Posts: 534
From: aurora ontario
pm me back, or add me to msn, im very interested on the full deal, on he motor and turbo kit ect... would be easier for me just to take it complete

let me know how much in pm

Last edited by camarolt4ss; Nov 30, 2006 at 03:34 PM.
Old Nov 30, 2006 | 03:31 PM
  #9  
lt1rx798's Avatar
Registered User
 
Joined: Nov 2006
Posts: 92
pm sent
Old Nov 30, 2006 | 04:54 PM
  #10  
2000GTP's Avatar
Registered User
 
Joined: Mar 2005
Posts: 12,312
From: Aurora, IL
Is the throttle body the 94-97 style? Do you have a few pics of it: gtpcamaroz@yahoo.com Thank you.
Old Nov 30, 2006 | 05:04 PM
  #11  
Rat Raceway's Avatar
Registered User
 
Joined: Oct 2006
Posts: 36
From: Denver
What size combustion Chambers on the heads?

Thanks
Ross
Old Dec 29, 2006 | 10:35 PM
  #12  
Unertl42's Avatar
Registered User
 
Joined: Jul 2005
Posts: 219
From: Savannah, GA
pm'd you
Old Dec 29, 2006 | 11:48 PM
  #13  
camarolt4ss's Avatar
Registered User
 
Joined: Feb 2006
Posts: 534
From: aurora ontario
complete turn key engine with turbo kit etc.... is all sold to me
Old Dec 31, 2006 | 09:33 PM
  #14  
Extinct's Avatar
Registered User
 
Joined: Nov 2004
Posts: 13
From: Woodstock, IL
Does trans include bellhousing and clutch ?
Old Jan 1, 2007 | 02:39 PM
  #15  
millese's Avatar
Registered User
 
Joined: Dec 2006
Posts: 8
Stroker

Hey stroker, did that stroker really buy the entire motor? I don't see that you acknowledged his post? Whats still for sale?



All times are GMT -5. The time now is 04:26 PM.