O.K., we're making big changes to the car this winter so the following items are going. Some stuff is not LT1 related as I have been cleaning out the garage cabinets. All prices do NOT include shipping. I will be willing to discuss helping transport some of the bigger things a reasonable distance to help out. Some prices are negotiable to a certain point. Please do not throw out low ball offers. I have been a member since 1999 and have done business on this board extensively. My items are not misrepresented. you get what has been advertised.

All items can be seen at:

http://community.webshots.com/user/toms396

Thanks.

Callies 5.85 rods with SRP .030 pistons for a 396. Less than 4000 miles, Very Very Good condition, normal wear. Oil changed every 500 miles with Royal purple. $625

Factory 95Z power steering pump with res, and lines, Works fine. Make offer

Lingelfelter 58mm TB with IAC and TPS. sold

95 Opti, less than 1000 miles. $sold

SVO 30 lb injectors, less than 4000 miles. sold

Moroso LT1 plug wires, good shape, no burns. $35

Sparco Torino seats, red, excellent condition, barely used with 4th gen seat brackets installed. These seats alone sell for $1200 a pair w/o brackets. $900 *can help transport a reasonable distance*

94 LT1 timing cover. $20

Grotyohann headers, 1 3/4" full length for 4th gen, Jet hot is still %80, Mufflex Y-pipe to fit, 3" collectors to a single 4" to connect to your catback, Custom Mufflex shorty Spintech exhaust to go right onto the end of the headers for the ultimate race track flow. Whole system. $690

95 LT1 fuel rails modified with -10 an fittings front and rear. sold

SLP Cold Air Induction, black, good shape, scratches on underside mostly. sold

Vortech aluminum intake elbow with MAF with billet housings. sold

Aluminum centerbolt valve covers with alternator cutout modified with Moroso locking breathers with -8 an fittings. Some scratches, pretty good shape. Breathers alone are $150/pair. $175

D&D T56. Viper 30 spline output shaft, carbon fiber blocker rings, steel shift forks, less than 500 miles w/bellhousing. Excellent condition. As close to brand new as you can get. Take 600+ hp. New from D&D was $2900 plus shipping. $2500 *Can help transport a reasonable distance*

GM LT1 powdered metal rods. Good shape. No problems. $70

GM factory roller lifters, Good shape. $40

Holley high flow, low pressure fuel regulator, part #12-704 $50

Holley Big Block Chevy racing mechanical fuel pump. new. part #12-454 $50

Holley chrome float bowl covers. new in bubble pack. part #34-501 $50

Mallroy unilite distributor for small chevy, goos shape, barely used. Comes with extra cap and rotor. Wiring connector cut off, have diagram. $100

2 coils, 1 Accel and 1 Avanti. $10 ea Accel sold

Autometer liquid filled 2 5/8" boost gauge. works fine, small dent int bezel. sold

feel free to post here, PM or e-mail me at n20dave@hotmail.com

 

Interested in boost guage. Tried to use link but it said I wan't owner of account and I couldn't log in? Can you send me a pic to alaskanmidnight@hotmail.com. Does the guage read true and not off my + or -? What boost does it read up to?

Thanks
Adam

 

Thanks for pointing that out. I think I fixed it. Try it again, if it doesn't work, I'll send it to you. As for the gauge. It's a mechanical gauge, meaning you have to run a piece of capillary or copper tubing or a braided line to it. It reads from 0 to 35 psi.

 

Link works Does the gauge come with what looks to be mounting bracket? Is there a bulb like most autometer guages that would allow me to have this gauge lighted. On the rear of the guage are all necessary ports for my to run rubber line for boost readings?

Thanks again
Adam

 

There is no bracket with it as this gauge was in the vent hole of a firebird which fits perfectly. There is provision for a light bulb. There is a fitting on the back for whatever adapter you want to use for your tubing.

 

I'm sorry I probably wasn't very clear. Is there an actual bulb in place with current wires that I just need to hook up or would I have to supply the bulb?

Thanks again for your time
Adam

 

There is a bulb there and I found a bracket for it as well.

 

Dave,

I'll take the throttle body. I thought you knew that I'll give you the money next week when Paul picks the motor stuff up.

Later,


Steve.

 

I'll take the accel coil. Sent you an email.

 

Everyone should have been replied to and the list is updated. Thanks.

 

I'll take the boost guage please shoot me your paypal address.

Adam

 

PM'ed you about the SLP intake and the Vortec Elbow/w MAF.

Thanks

 

PM'ed, will take the fuel rails.

 

PM sent concerning the other coil.

 

I believe I got back to everybody and the list has been updated. Thanks