thinking of parting her out
06-10-2005, 02:15 PM
#1
Registered User
Thread Starter
Join Date: Dec 2001
Location: Peachtree City, GA
Posts: 808
parting her out
Well I have finally lost intrest in my car 
I am parting her out...If it isnt on the list...it isnt for sale...Before you get you hopes up I am putting the car back to stock so if you buy something I will need your STOCK parts.
1. COMPLETE 383 Stroker set up for a blower. Just got the block and heads back from the machine shop today ( Got resurfaced and O-Ringed) Specs:
2 Bolt main with ARP main studs. Eagle Crank Double keyed, Eagle H-Beam rods, JE Blower Pistons # 170817) Moroso 7 QT Oil pan, New Clevitte Bearings all around, new pistion rings, Custom CC Blower Cam, Comp R Lifters, Trick Flow Chrome moly Push rods, Crane 1.6 RR, ARP Rocker Arm Studs, Lingenfelter CNC Heads, Port Matched Intake, 52 MM TB, ARP Head Studs, SCE Copper Head gaskets. Had approx 1k miles on it then I tore it down and had machine work done. $5000 Plus ship
2. Vortec S trim. I dont know what size pulley is on it but I saw 14PSI boost when I hod it hooked up. Comes with all piping and clamps. Intake is a Brad Brand with K&N Filter $2000 Plus Ship
3. Street Twin with approx 5k miles on it. I will need your stock clutch. Comes with adj master. $600 Plus ship (SOLD)
4. 9 Inch. Currie Housing wit 3.80 Gears. Has gear whine and only about 2k miles on it. I will need a stock replacement $1600 Plus ship
5. Drive shaft shortend for a 12 bolt. Has the bigger U joint in it for a 12 bolt and is 3.5 inch dia. for got the comapny I bought it from but it is steel and very little vibration (with poly mounts all around) $ 200 plus your stocker
6. PA Tublar K Member. Has some of the paint coming off from where I had a jack. 300 plus ship (Dont need your stock 1)
7.. American Racing 200S wheels. Fronts are 17*9.5 and rears are 17*11 Rear tires are good with under 500 miles on them and are BFGoodwrench Comp TA Drag Radials. Fronts are sumitoma (SP) they are fine but drove around a lill while when my alignment was WAY off. so the inside os wore alot. $900 plus your stockers
8. Hooker LTs. little rusty but no holes are leaks. $300 plus stock mainafolds and y pipe (96-97) (Pending)
9. Warbird hood. Paint is great havent had it that long and has always been waxed and garage kept $500 Plus your stocker (needs to be black) (SOLD)
10. Lakewood boxed lower control arms. poly bushings. $50 plus your stockers.
11. LT1 Scanmaster. MINT condition. Works perfect $200 plus ship
12. Tripple gauge piller. has Oil pressure gauge, Boost gauge and Fuel pressure gauge(needs sender) The oil pressure gauge is electric full sweep 0-100 PSI, Boost gauge is 10 Vac to 30 PSI Boost, Fuel pressure gauge is electric and needs a sender to make it work. All gauges are Autometer Phantom series. I will need your stock A piller for a 97 and up camaro T Top. $150 Shipped
13. True duals OVER AXLE. Near the rear end yoke the DS hit it and needs to be repaired. but it ISNT a hole yet. Just worn. Looking to get 100 plus ship and your stock system.
Pixs of everything can be seen in my sig
Thanks
Matt
I am parting her out...If it isnt on the list...it isnt for sale...Before you get you hopes up I am putting the car back to stock so if you buy something I will need your STOCK parts. 1. COMPLETE 383 Stroker set up for a blower. Just got the block and heads back from the machine shop today ( Got resurfaced and O-Ringed) Specs:
2 Bolt main with ARP main studs. Eagle Crank Double keyed, Eagle H-Beam rods, JE Blower Pistons # 170817) Moroso 7 QT Oil pan, New Clevitte Bearings all around, new pistion rings, Custom CC Blower Cam, Comp R Lifters, Trick Flow Chrome moly Push rods, Crane 1.6 RR, ARP Rocker Arm Studs, Lingenfelter CNC Heads, Port Matched Intake, 52 MM TB, ARP Head Studs, SCE Copper Head gaskets. Had approx 1k miles on it then I tore it down and had machine work done. $5000 Plus ship
2. Vortec S trim. I dont know what size pulley is on it but I saw 14PSI boost when I hod it hooked up. Comes with all piping and clamps. Intake is a Brad Brand with K&N Filter $2000 Plus Ship
3. Street Twin with approx 5k miles on it. I will need your stock clutch. Comes with adj master. $600 Plus ship (SOLD)
4. 9 Inch. Currie Housing wit 3.80 Gears. Has gear whine and only about 2k miles on it. I will need a stock replacement $1600 Plus ship
5. Drive shaft shortend for a 12 bolt. Has the bigger U joint in it for a 12 bolt and is 3.5 inch dia. for got the comapny I bought it from but it is steel and very little vibration (with poly mounts all around) $ 200 plus your stocker
6. PA Tublar K Member. Has some of the paint coming off from where I had a jack. 300 plus ship (Dont need your stock 1)
7.. American Racing 200S wheels. Fronts are 17*9.5 and rears are 17*11 Rear tires are good with under 500 miles on them and are BFGoodwrench Comp TA Drag Radials. Fronts are sumitoma (SP) they are fine but drove around a lill while when my alignment was WAY off. so the inside os wore alot. $900 plus your stockers
8. Hooker LTs. little rusty but no holes are leaks. $300 plus stock mainafolds and y pipe (96-97) (Pending)
9. Warbird hood. Paint is great havent had it that long and has always been waxed and garage kept $500 Plus your stocker (needs to be black) (SOLD)
10. Lakewood boxed lower control arms. poly bushings. $50 plus your stockers.
11. LT1 Scanmaster. MINT condition. Works perfect $200 plus ship
12. Tripple gauge piller. has Oil pressure gauge, Boost gauge and Fuel pressure gauge(needs sender) The oil pressure gauge is electric full sweep 0-100 PSI, Boost gauge is 10 Vac to 30 PSI Boost, Fuel pressure gauge is electric and needs a sender to make it work. All gauges are Autometer Phantom series. I will need your stock A piller for a 97 and up camaro T Top. $150 Shipped
13. True duals OVER AXLE. Near the rear end yoke the DS hit it and needs to be repaired. but it ISNT a hole yet. Just worn. Looking to get 100 plus ship and your stock system.
Pixs of everything can be seen in my sig
Thanks
Matt
Last edited by lillbush5555; 06-30-2005 at 09:34 PM.
06-11-2005, 02:07 PM
#6
Registered User
Join Date: Oct 2004
Location: Austin, Tx
Posts: 512
Re: thinking of parting her out
pics of the hood and the LT'S. DO the Lt's come with the y pipe? are they coated? My car is black. send to luda0840@sbcglobal.net
06-12-2005, 08:37 PM
#8
Registered User
Thread Starter
Join Date: Dec 2001
Location: Peachtree City, GA
Posts: 808
Re: thinking of parting her out
Originally Posted by LUDA0840
pics of the hood and the LT'S. DO the Lt's come with the y pipe? are they coated? My car is black. send to luda0840@sbcglobal.net
No y pipe seeing as how I have True duals. I cant really get a good pix of them due to them still being in the car. They are not coated
Matt
06-21-2005, 05:20 PM
#15
Registered User
Thread Starter
Join Date: Dec 2001
Location: Peachtree City, GA
Posts: 808
Re: thinking of parting her out
Originally Posted by wicked_95z
Does the blower have an intercooler??
Originally Posted by Deenasty
can you send me pics of the vortech, have cash in hand...
Matt
BTW: Everything is FS officaly now