Ist off... there is nothing wrong with all this and all the parts have under 5k miles on them; i am just thinking about going solid roller.

Comp Pro Mag 1.6 3/8 stud NSA rockers: 175
Comp-R lifters - 145
Trick Flow One Piece Chromoly .08 thickness 7.2" Pushrods: 70
Stock 3/8 Studs ground to help rocker backout (*ill explain) - 10
EX612 Springs and lightweight chromoly retainers - 75

*The rocker studs were ground because when they are made, there is a little cup at the top where the poly locks sit and imperfections can cause improller seating of the poly locks and cause it to back out.

Trades for anything for solids will be accepted:
1.5 or 1.6 3/8 rockers
Solid lifters/cams (havent made a final decision)
BEEFY springs

Thanks,
Stu

 

do the springs fit stock un machined heads ?
double or single coil?
what lift max ?

 

single springs, fit stock heads, good to 600 lift

 

Would you take 400 for the whole setup?

 

how many miles are on the 612's and what cam was used with them?

 

Will you take 400, lemme know, I've got PayPal!

 

plus I can pick the springs up. LMK